330930-060-00-00 Bently Nevada Extension Cable

Bently Nevada 330930-060-00-00 3300 XL Standard Extension Cable

Bently Nevada 330930-060-00-00 3300 XL Standard Extension Cable

Disponibilidad: 10 Quedan en stock

Configured for high-frequency signal transmission in 3300 XL Proximity Transducer System networks, the Bently Nevada 330930-060-00-00 (3300 XL Standard Extension...

Código: 330930-060-00-00

Manufacturer: Bently Nevada
Product No.: 330930-060-00-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Configured for high-frequency signal transmission in 3300 XL Proximity Transducer System networks, the Bently Nevada 330930-060-00-00 (3300 XL Standard Extension Cable) provides direct physical/electrical execution between proximity probes and Proximitor sensors.

Suffix Breakdown & Model Matrix

The catalog option code sequence for the 330930-060-00-00 extension cable is structured as follows:

330930: Base Model designation for 3300 XL Standard Extension Cable
060: Cable Length Option - 6.0 meters (19.7 feet)
00: Connector and Cable Option - Standard cable without stainless steel armor
00: Agency Approval Option - Standard construction, approvals not required

Hardware Specifications

Parameter	Specification
Model	330930-060-00-00
Brand	Bently Nevada
Origin	USA
Weight	2.0 kg (Shipping weight)
Dimensions	6.0 meters (19.7 feet) physical length
Operating Temp	-51 to 177 deg C (-60 to 351 deg F)
Power Consumption	Passive physical conductor loop (zero power dissipation)
Construction	Coaxial, fluoroethylene propylene (FEP) insulated
Armoring	Option 00 (Without stainless steel armor)
Agency Approval	Option 00 (Not required)

Eddy-Current Probe Scaling & Gap Voltage Validation

The 3300 XL extension cable routes high-frequency excitation currents to maintain matched electrical length and loop impedance between the probe tip and the Proximitor sensor. Preserving exact cable physical length prevents distortion in eddy-current probe scaling, ensuring linear output voltage across shaft dynamic displacement ranges. During field commissioning, gap voltage validation requires verifying the physical probe position until a static baseline voltage of -10 VDC is measured across the Proximitor terminals under non-rotating shaft conditions.

Frequently Asked Questions

Q: Why must the extension cable match the calibrated system length of the Proximitor sensor?

A: The Proximitor sensor circuit is tuned to the capacitance and inductance of a specific overall system length (typically 5 meters or 9 meters total). Installing an incorrect extension cable length alters loop impedance and invalidates eddy-current calibration scaling.

Q: What precautions should be taken when installing unarmored (Option 00) coaxial extension cables?

A: Unarmored FEP cables must be installed inside rigid metal conduit or covered instrument raceways to protect the dielectric layer against physical impact, sharp bends, and heavy mechanical crushing.

Field Installation Guidelines

Conduit Separation: Route the extension cable through dedicated electrical conduits, keeping it physically separated from AC power lines and variable frequency drive output cables to suppress inductive noise.
Connector Assembly: Clean ClickLoc coaxial connectors prior to engagement. Push and turn the barrel until fully latched; do not apply excessive rotational torque or axial force on the cable junction.
Bend Radius Limits: Maintain a minimum bend radius along the 6.0-meter run to avoid compromising the FEP inner dielectric insulation or causing coaxial shield migration.
Shield Grounding Integrity: Verify shield continuity across all intermediate junction boxes, ensuring the loop is grounded exclusively at the monitoring rack interface to eliminate circulating ground currents.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.