F 3330 HIMA 984333002 HIQuad Safety PLC Digital Output Module 24VDC

Disponibilidad: 99 Quedan en stock

HIMA F3330 Digital Output Module The HIMA F3330, also cataloged as the F3330 Digital Output Module (Part No: 984333002), operates...

Código: F3330

Manufacturer: HIMA
Product No.: F3330
Product Type: Digital Output Modules
Product Origin: Germany
Payment:T/T, Western Union
Weight: 600g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

HIMA F3330 Digital Output Module

The HIMA F3330, also cataloged as the F3330 Digital Output Module (Part No: 984333002), operates as a dedicated hardware component for driving discrete safety actuation loops and field load switches within HIQuad safety PLC system platforms.

Hardware Specifications

Parameter	Specification
Model	F3330 (Part No: 984333002)
Brand	HIMA
Origin	Germany
Weight	0.25 kg (module) / 0.60 kg (system weight)
Dimensions	207 x 147 x 67 mm (4 TE rack width)
Operating Temp	-20 to +60 deg C
Power Consumption	110 mA at 5 VDC + 180 mA at 24 VDC (excluding load)
Discrete Channel Density	8 independent safety digital output channels
Output Voltage	24 VDC nominal
Output Current	Max 500 mA per channel (short-circuit proof)
Load Limits	Resistive/inductive up to 12 W; lamp loads up to 4 W
Internal Voltage Drop	Max 2 V at full load
Leakage Current	Max 350 uA when deactivated
Response Time	Max 8 ms
Line Resistance Limit	Max 11 ohm combined input/output
Safety Integrity Level	IEC 61508 SIL3, EN ISO 13849-1 PL e, TÜV certified
Diagnostics	Self-test, walking-bit test, short-circuit detection, undervoltage tripping at max 16 V
Mounting Type	Rack-mounted (HIQuad subrack)

Galvanic Isolation & Fail-Safe State Execution

The HIMA F3330 module relies on internal galvanic isolation barriers to decouple field-side 24 VDC switching circuits from the internal processing logic and system backplane bus. This electrical separation prevents external ground loops and voltage surges from propagating into central processor modules.

Integrated diagnostic routines continuously perform walking-bit tests, current monitoring, and line surveillance on each of the 8 channels. Certified to IEC 61508 SIL3 standards, any detected short-circuit event, cross-talk fault, or supply drop below 16 VDC forces the module into immediate fail-safe state execution, driving the affected output loop into a safe, de-energized condition without compromising system integrity.

Frequently Asked Questions

Q: How does the F3330 module react when the field power supply drops below normal operating thresholds?

A: The module incorporates automatic undervoltage tripping logic that forces the digital output channels into a safe, de-energized state if the input supply voltage drops to 16 VDC or below.

Q: What are the primary channel loading limits for resistive and lamp loads?

A: Each individual output channel supports continuous loads up to 500 mA, accommodating resistive and inductive loads up to 12 W or incandescent lamp loads up to 4 W.

Q: Can the F3330 module be hot-swapped during active controller operation?

A: Yes, provided the HIQuad chassis configuration and system safety guidelines permit hot-swapping under powered conditions without interrupting adjacent subrack I/O signals.

Field Installation Guidelines

Insert the F3330 module into its designated slot within the HIQuad 4 TE subrack chassis, ensuring backplane connectors engage fully before tightening top and bottom panel retaining screws. Maintain a minimum vertical clearance of 50 mm above and below the subrack to ensure passive convection airflow across the -20 to +60 deg C operating temperature spectrum.

Route 24 VDC field output wiring through grounded metal conduits or dedicated wiring ducts, keeping signal runs separated from high-voltage AC lines. Ensure field loop line resistance does not exceed 11 ohm total, terminate cable shielding directly at the cabinet earthing bar, and verify output load current demands do not exceed 500 mA per channel prior to energizing the module.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.