Foxboro P0916FK Termination Assembly

Foxboro P0916FK Termination Assembly | New & Original Stock

Disponibilidad: 10 Quedan en stock

Foxboro P0916FK Termination Assembly The Foxboro P0916FK, also cataloged as the P0916FK Termination Assembly, operates as a dedicated hardware component...

Código: P0916FK

Manufacturer: Foxboro
Product No.: P0916FK
Product Type: Termination Assemblies
Product Origin: USA
Payment:T/T, Western Union
Weight: 735g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Foxboro P0916FK Termination Assembly

The Foxboro P0916FK, also cataloged as the P0916FK Termination Assembly, operates as a dedicated hardware component for field wiring distribution and signal conditioning within I/A Series DCS platforms. The unit forms the physical termination interface linking external field sensors and actuators to secondary Fieldbus Modules via a integrated 5-meter Type 4 cable assembly.

Hardware Specifications

Parameter	Specification
Model	P0916FK
Brand	Foxboro (Schneider Electric)
Origin	USA
Weight	1.62 lbs
Dimensions	Standard FBM system termination footprint
Operating Temp	-20 to +60 deg C
Power Consumption	Sourced via FBM backplane connection
Channel Capacity	Multi-channel capacity dependent on FBM pairing
Signal Types	4-20 mA current loops, voltage signals, thermocouples, RTDs
Termination Type	Screw-clamp terminals (12-22 AWG)
Cable Specification	5-meter Type 4 interface cable
Isolation	Channel-to-channel and channel-to-ground isolation
Mounting	DIN rail or rack base
Enclosure Rating	IP20 (cabinet installation required)
Storage Temp	-40 to +85 deg C

Process Control & DCS Instrumentation Properties

The hardware assembly establishes dedicated electrical paths supporting 4-20 mA HART loop protocol passes alongside standard analog voltage, RTD, and thermocouple signals. High-density channel-to-channel isolation prevents cross-channel electrical noise, shielding the internal system backplane from voltage surges up to the rated isolation boundaries. Built-in cold junction compensation reference points are deployed across the terminal strips to preserve absolute precision when interfacing with millivolt thermocouple circuits under fluctuating ambient thermal gradients.

Frequently Asked Questions

Q: How are open-circuit and short-circuit faults processed through this assembly?

A: Fault detection is managed through the paired Fieldbus Module. The P0916FK routes the raw analog signals and continuity loops back to the FBM backplane, where active diagnostics isolate field wiring line breaks.

Q: Is external power required to actuate the circuitry on the termination assembly?

A: No external power distribution is required. All necessary loop and internal diagnostic power is derived directly from the host FBM module via the pre-engineered Type 4 connection interface.

Field Installation Guidelines

Cable Routing and Strain Relief: Ensure the pre-attached 5-meter Type 4 cable is routed through dedicated wire ducts separate from high-voltage AC lines to prevent induction noise. Maintain standard bend radii to prevent internal conductor stress.
Shield Grounding Protocol: Terminate all incoming instrument cable shields at the designated low-impedance copper grounding bus within the enclosure cabinet. Do not ground the shields at both ends of the run to prevent ground loops.
DIN Rail Engagement: Mount the assembly securely to standard symmetric DIN rails, confirming that the physical mechanical locking tabs are entirely seated to mitigate high-frequency vibrational displacement.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.