873CC-BIYFGZ Foxboro 873CC Series Datasheet & Technical Manual

Disponibilidad: 10 Quedan en stock

Foxboro 873CC-BIYFGZ Conductivity Analyzer The Foxboro 873CC-BIYFGZ, also cataloged as the 873CC Industrial Conductivity Analyzer, operates as a dedicated hardware...

Código: 873CC-BIYFGZ

Manufacturer: Foxboro
Product No.: 873CC-BIYFGZ
Product Type: Conductivity Analyzers
Product Origin: USA
Payment:T/T, Western Union
Weight: 839g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Foxboro 873CC-BIYFGZ Conductivity Analyzer

The Foxboro 873CC-BIYFGZ, also cataloged as the 873CC Industrial Conductivity Analyzer, operates as a dedicated hardware component for continuous monitoring of liquid conductivity and resistivity within industrial process networks. The instrument processes electrochemical data streams by executing dual-channel sensor signal acquisition directly from contacting conductivity probes.

Hardware Specifications

Parameter	Specification
Model	873CC-BIYFGZ
Brand	Foxboro (Schneider Electric)
Origin	USA
Weight	1.85 lbs (839 g)
Dimensions	Standard 873 series panel mount dimensions
Operating Temp	-10 to +50 deg C
Power Consumption	Sourced via 100-240 V AC, 50/60 Hz line feed
Measurement Type	Contacting conductivity and resistivity
Measurement Range	0.00 uS/cm to 20.00 mS/cm (configurable)
Sensor Inputs	Dual-channel (supports 独立 2 sensors)
Temperature Compensation	Automatic via integrated RTD (100 Ohm)
Display	4-digit high-contrast LED
Outputs	4-20 mA analog; 2 configurable alarm relays (5 A at 125 V AC)
Digital Communication	Optional RS-485 / Modbus
Enclosure Rating	NEMA 4XKI (corrosion-resistant metal variant)

Process Control & DCS Instrumentation Properties

The analyzer incorporates a dual-sensor input structure designed to handle simultaneous, independent measurement routines across separate water lines without channel cross-talk. The analog output circuits are configured to translate electrochemical variables into isolated 4-20 mA loops for direct integration into DCS controllers. Automatic temperature compensation is maintained through continuous tracking of an integrated 100 Ohm RTD element, stabilizing the 16-bit algorithmic calculation of conductivity, resistivity, or removal rate when exposed to fluctuating process fluid temperatures.

Frequently Asked Questions

Q: What are the electrical parameters and ratings for the onboard alarm relays?

A: The instrument features two independent, configurable alarm relays (normally open/normally closed) rated to interrupt resistive loads up to 5 A at 125 V AC or 5 A at 30 V DC.

Q: How does the unit preserve its configuration data during a complete primary power interruption?

A: The analyzer utilizes non-volatile EEPROM memory to store all user-defined calibration factors, scale limits, and temperature compensation coefficients, preventing data loss without requiring internal backup batteries.

Field Installation Guidelines

Enclosure Grounding: Connect the dedicated internal ground terminal of the NEMA 4XKI metal housing directly to the plant instrument earth bus to suppress electromagnetic field interference.
Sensor Wire Shielding: Route sensor interconnecting cables through dedicated, grounded metal conduit. Keep sensor lines physically isolated from high-voltage AC power distribution conduits to eliminate signal degradation.
Panel Cutout Alignment: Ensure the panel cutout matches factory dimensions exactly. Seat the integrated gasket flat against the panel surface before tightening the mounting brackets to maintain environmental sealing integrity.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.