IC695CPE330 GE Fanuc RX3i Series Datasheet & Technical Manual

GE Fanuc IC695CPE330 RX3i PacSystem CPU Module

GE Fanuc IC695CPE330 RX3i PacSystem CPU Module

Disponibilidad: 10 Quedan en stock

The GE Fanuc IC695CPE330 serves as the primary IC695CPE330 CPU module utilized to execute logic processing and network communication tasks...

Código: IC695CPE330

Manufacturer: GE Fanuc
Product No.: IC695CPE330
Product Type: CPU Processors
Product Origin: USA
Payment:T/T, Western Union
Weight: 1080g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The GE Fanuc IC695CPE330 serves as the primary IC695CPE330 CPU module utilized to execute logic processing and network communication tasks across RX3i PacSystem platforms.

Hardware Specifications

Parameter	Specification
Model	IC695CPE330
Brand	GE Fanuc Emerson
Origin	United States
Weight	1.08 kg (2.38 lbs)
Dimensions	Standard 2-slot width module
Operating Temp	0 to 60 deg C
Power Consumption	0.0 A at 5 VDC, 0.0 A at 3.3 VDC, 0.625 A at 24 VDC
Processor Clock Speed	1.0 GHz (Core) / 1.6 GHz Dual Core operational profile
RAM	64 MB
NVRAM	64 MB
Program Storage	64 MB User Memory via ICFast / Compactflash
Ethernet Ports	3x RJ-45 (1x Single port LAN 1, 2x Dual port LAN 2 with embedded switch)
Port Speeds	10/100/1000 Mbps (Gigabit supported)
Max Program Blocks	512 blocks (Maximum 128 KB per block)
I/O Capacity	Up to 32 K discrete / analog points, 8 local racks maximum
Protocols Supported	Modbus TCP, SRTP, EGD, OPC UA, PROFINET, DeviceNet, PROFIBUS
Serial Interfaces	None
Auxiliary Storage Link	1x USB 2.0 Master port
Companion Energy Pack	IC695ACC402 compatibility

Profinet / EtherNet/IP Deterministic Networks and Firmware Flash Compatibility

The processor architecture utilizes dedicated microprocessor cores to isolate logic execution loops from the embedded switch networking layer. This optimizes synchronization across Profinet / EtherNet/IP deterministic networks, maintaining structural stability for media and controller redundancy configurations up to 8 racks. Network performance remains predictable during broad I/O density scaling due to independent handling of up to 48 concurrent SRTP connections. System configuration blocks maintain strict firmware flash compatibility parameters across the universal backplane, permitting online software downloads and runtime diagnostics without impacting active runtime communication schedules.

Frequently Asked Questions

Q: Does this module draw power from the 5 VDC or 3.3 VDC backplane pins?

A: No. The internal logic circuits of the IC695CPE330 consume 0.0 A at 5 VDC and 3.3 VDC. The total module power requirement is derived exclusively from the 24 VDC backplane rail, drawing a fixed 0.625 A current load.

Q: How are the three integrated RJ-45 interfaces partitioned on the network level?

A: The interfaces are divided into two distinct logical networks. LAN 1 operates via a single isolated RJ-45 port for direct network segregation. LAN 2 contains two physical RJ-45 ports tied to an embedded switch, facilitating local daisy-chain topologies.

Field Installation Guidelines

Disconnect all primary power to the universal backplane prior to mounting or unmounting the CPU module to safeguard the internal backplane bus interface pins.
Seat the module firmly into its 2-slot designation within the RX3i local rack frame, checking that the top and bottom structural latches are fully engaged.
If using an external backup mechanism, connect the optional IC695ACC402 energy pack module directly to the dedicated port array located on the bottom faceplate of the CPU housing.
Separate the 10/100/1000 Mbps Ethernet communication cables from physical motor drives and high-power AC relay trunks to prevent high-frequency electromagnetic noise induction.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.