IC698CPE030 GE Fanuc PACSystems RX7i Datasheet & Technical Manual

GE Fanuc IC698CPE030 PACSystems RX7i Controller

GE Fanuc IC698CPE030 PACSystems RX7i Controller

Disponibilidad: 10 Quedan en stock

The GE Fanuc IC698CPE030, also cataloged as the IC698CPE030 Central Processing Unit, operates as a dedicated hardware component for logic...

Código: IC698CPE030

Manufacturer: GE Fanuc
Product No.: IC698CPE030
Product Type: CPU Processors
Product Origin: USA
Payment:T/T, Western Union
Weight: 820g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The GE Fanuc IC698CPE030, also cataloged as the IC698CPE030 Central Processing Unit, operates as a dedicated hardware component for logic execution and communication management within PACSystem RX7i platforms.

Hardware Specifications

Parameter	Specification
Model	IC698CPE030
Brand	GE Fanuc Emerson
Origin	United States
Weight	0.82 kg (1.81 lbs)
Dimensions	Standard RX7i rack module width
Operating Temp	Industry standard 0 to 60 deg C (ambient)
Power Consumption	3.4 A at 5 VDC
Microprocessor	600 MHz Pentium M
User Memory	64 MB RAM / 64 MB Flash
Discrete I/O Memory	32 K bits
Analog I/O Memory	32 K words
Boolean Execution Speed	0.069 ms per 1000 contacts/coils
Embedded Ethernet Ports	2x RJ45 (10/100 Mbps, auto-sensing)
Built-in Serial Ports	1x RS-232, 1x RS-485 (isolated), 1x RS-232 Station Manager
Supported Protocols	SRTP, Modbus TCP (Client/Server), EGD, Modbus RTU Slave, SNP, Serial I/O
Base Architecture	VME64

Backplane Bus Communication Velocity and Deterministic Networks

The module establishes high-speed connectivity via a VME64 base architecture, optimizing backplane bus communication velocity to manage embedded VME technology and legacy Series 90-70 I/O modules. Dual auto-sensing integrated Ethernet ports provide native data mapping across Profinet / EtherNet/IP deterministic networks through protocols like Ethernet Global Data (EGD) and Modbus TCP. This backbone structure maintains tight data synchronization during massive I/O density scaling up to the memory limits, while firmware flash compatibility ensures field updates to the execution engine execute without disrupting memory mapping.

Frequently Asked Questions

Q: What is the backplane power allocation requirement for the IC698CPE030 module?

A: The module requires 3.4 A at 5 VDC directly from the RX7i backplane power supply bus. Ensure that the total current draw of all cards in the local chassis does not exceed the power supply specification.

Q: How is the volatile application data protected during an unpowered state?

A: The 64 MB user memory is battery-backed to sustain application variables, data logs, and system states. Permanent storage of configuration parameter sets and logic code is handled via the onboard 64 MB user flash memory.

Field Installation Guidelines

Turn off the rack power supply prior to inserting the controller module into the designated slot of the RX7i rack to prevent circuit trace damage.
Align the board circuit edge with the card guides of the VME64 chassis and press the module locking levers until the rear connectors are seated completely.
Tighten the faceplate retaining screws to verify frame ground continuity between the module shield and the enclosure ground structure.
Separate the RJ45 industrial Ethernet cables from surrounding heavy-duty actuator power conduits to mitigate high-frequency cross-talk or induced noise on communication paths.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.