GE IS215VPROH2BC Turbine Emergency Trip Board

General Electric IS215VPROH2BC Mark VIe Turbine Emergency Trip Board

Disponibilidad: 9 Quedan en stock

DescriptionThe GE IS215VPROH2BC is a critical Turbine Emergency Trip Board designed for the General Electric Mark VI and Mark VIe...

Código: IS215VPROH2BC

Manufacturer: General Electric
Product No.: IS215VPROH2BC
Product Type: Turbine Emergency Trip Board
Product Origin: USA
Payment:T/T, Western Union
Weight: 2150g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Description

The GE IS215VPROH2BC is a critical Turbine Emergency Trip Board designed for the General Electric Mark VI and Mark VIe Speedtronic turbine control systems. This VME-based protection assembly functions as an independent safety layer, providing essential emergency overspeed protection (EOS) and emergency stop functionality for gas, steam, and wind turbines. It operates as a high-speed processor to ensure turbine integrity by monitoring speed signals and executing trip commands.

Features

Triple Redundant Architecture: Supports Triple Modular Redundancy (TMR) with independent X, Y, and Z sections for hardware voting and fault tolerance.
Comprehensive Protection: Provides emergency overspeed detection, emergency stop processing, and backup synchronization checking.
Integrated Diagnostics: Continuously monitors relay status, power supplies, terminal board identification, solenoid circuits, thermocouple inputs, and analog signals.
Onboard Power Conversion: Accepts 125 VDC input and internally generates 5 VDC and 28 VDC for electronics and solenoid drivers.
High-Speed Processing: Operates at a frame rate of up to 100 Hz with rapid solenoid response times.

Applications

Power Generation: Prevents catastrophic turbine failure in combined-cycle plants and utility grids.
Oil & Gas: Protects large compressors and pumps driven by industrial gas turbines.
Turbine Safety: Acts as a dedicated safety layer for emergency shutdown (ESD) and overspeed protection.

Technical Specifications

Model	IS215VPROH2BC
Manufacturer	General Electric
Power Supply	125 VDC
Internal Power	5 VDC and 28 VDC
Frame Rate	Up to 100 Hz
MPU Input Sensitivity	Min 27 mV peak at 2 Hz
MPU Frequency Range	2 Hz to 20 kHz
Memory	16 MB DRAM
VME Slot Occupancy	2 Slots
Operating Temp	0 degC to +50 degC
Storage Temp	-40 degC to +70 degC

Installation Guidelines

ESD Precautions: Always use a grounded wrist strap when handling the board to prevent electrostatic discharge damage to sensitive components.
Power Down: Ensure the 125 VDC power source is disconnected from the PDM before inserting or removing the module from the VME rack.
Wiring: Connect the 125 VDC power input to the J7 connector. Use 40-pin ribbon cables for connections to TPRO/TREG terminal boards via front-panel latching connectors (J3-J6).
Environment: Ensure the cabinet provides adequate ventilation to maintain operating temperatures between 0 degC and 50 degC.
Grounding: Verify that the VME rack is properly grounded to the cabinet chassis to minimize EMI and ensure signal integrity.

FAQ

What is the primary function of the IS215VPROH2BC?

It acts as the primary Emergency Overspeed (EOS) protection for industrial turbines, monitoring speed and tripping solenoids if dangerous conditions are detected.

Does the board support TMR operation?

Yes, it supports Triple Modular Redundancy (TMR) architecture, where three independent processors perform hardware voting to improve system availability.

Can this board support a second TREG terminal board?

No, the H2B variant is designed as a lower-power version that does not support a second TREG terminal board.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.