IC695CBL002 GE Fanuc RX3i Series Datasheet & Technical Manual

IC695CBL002 GE Fanuc RX3i PacSystem Replacement Cable

IC695CBL002 GE Fanuc RX3i PacSystem Replacement Cable

Disponibilidad: 10 Quedan en stock

The GE Fanuc IC695CBL002, also cataloged as the IC695CBL002 Replacement Cable for CPU Connection, operates as a dedicated hardware component...

Código: IC695CBL002

Manufacturer: GE Fanuc
Product No.: IC695CBL002
Product Type: PLC Interface Cables
Product Origin: USA
Payment:T/T, Western Union
Weight: 450g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The GE Fanuc IC695CBL002, also cataloged as the IC695CBL002 Replacement Cable for CPU Connection, operates as a dedicated hardware component for linking a central processing unit to an auxiliary energy storage module within RX3i PacSystem platforms.

Hardware Specifications

Parameter	Specification
Model	IC695CBL002
Brand	GE Fanuc Emerson
Origin	United States
Weight	0.45 kg (1.00 lbs)
Dimensions	1.0 meter (36 inches) length
Operating Temp	0 to 60 deg C (32 to 140 deg F)
Power Consumption	Passive component (signal/power transmission only)
Product Line	RX3i PacSystem
Connector Type	7-pin, keyed
Wiring Configuration	Straight-through end-to-end
Integrated Termination	Yes (termination resistor included)
Supported Hardware	IC695CPE330 CPU and IC695ACC402 Energy Pack
Environmental Compliance	EU RoHS directive 2011/65/EU
Associated System Voltage	120/240 VAC, 125 VDC, or 24 VDC nominal sources

Backplane Bus Communication Velocity and Deterministic Networks

The physical connection established by this cable facilitates direct electrical execution during a main power failure, enabling the system to sustain the critical voltage required for data backup operations. By connecting the IC695CPE330 processor directly to the IC695ACC402 energy pack, it ensures uninterrupted backup power transit without degrading backplane bus communication velocity. This rapid power switchover secures user memory and transfers data to non-volatile storage, maintaining the integrity of deterministic networks states prior to full processor shutdown while preventing localized fault propagation during I/O density scaling.

Frequently Asked Questions

Q: Can the IC693 or alternative legacy series hardware utilize this cable for backup connections?

A: No. The physical keying of the 7-pin connector limits application exclusively to specific RX3i PacSystem components, specifically the IC695CPE330 CPU and the IC695ACC402 energy pack interface slots.

Q: Does this cable support hot-swapping while the CPU module is executing logic?

A: Disconnecting the cable during active operation compromises the energy pack backup circuit. If a main power disruption happens while the cable is disconnected, the CPU cannot execute the memory save sequence to non-volatile flash memory, resulting in total loss of volatile data.

Field Installation Guidelines

Power down the controller rack before attaching or removing the interface cable to prevent transient electrical arcs across the pins.
Locate the 7-pin keyed matching receptacles on the lower section of both the IC695CPE330 processor module and the corresponding energy pack assembly.
Align the internal keyways of the cable connector with the module plug and push firmly until the locking mechanism engages completely.
Route the 1-meter cable away from high-voltage AC lines and motor drive wiring within the enclosure to eliminate electrical noise coupling on the data sense lines.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.