IC695CMU310 GE Fanuc CPU Processor Module

IC695CMU310 GE Fanuc PACSystems RX3i CPU Module

IC695CMU310 GE Fanuc PACSystems RX3i CPU Module

Disponibilidad: 10 Quedan en stock

The GE Fanuc IC695CMU310, also cataloged as the IC695CMU310 Max-On Hot-Standby Redundancy CPU, operates as a dedicated hardware component for...

Código: IC695CMU310

Manufacturer: GE Fanuc
Product No.: IC695CMU310
Product Type: CPU Processors
Product Origin: USA
Payment:T/T, Western Union
Weight: 430g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The GE Fanuc IC695CMU310, also cataloged as the IC695CMU310 Max-On Hot-Standby Redundancy CPU, operates as a dedicated hardware component for central processing and redundant system execution within PACSystems RX3i networks.

Hardware Specifications

Parameter	Specification
Model	IC695CMU310
Brand	GE Fanuc Emerson
Origin	USA
Weight	0.94 lbs (0.43 kg)
Dimensions	Single-slot RX3i module width
Operating Temp	0 to 60 deg C
Power Consumption	1.0 A at +5 VDC and 1.25 A at +3.3 VDC
Execution Speed	0.195 ms per 1000 Boolean contacts or coils
Memory Capacity	10 MB battery-backed RAM and 10 MB non-volatile flash user memory
Serial Interfaces	1 x RS-232, 1 x RS-485 embedded ports
Protocol Support	Modbus RTU Slave, SNP, Serial I/O
Backplane Compliance	PCI 2.2 standard, dual backplane architecture
Logic Capacity	Up to 512 program blocks, auto-located symbolic variables
Mode Control	3-position toggle switch

Backplane Bus Communication Velocity & Redundant Execution

The IC695CMU310 processor interfaces directly with the RX3i PCI 2.2 backplane bus, enabling backplane bus communication velocity and high-speed data synchronization across dual backplane configurations. Designed for integration with Max-On software and dedicated Ethernet networks, the unit processes logic at 0.195 ms per 1000 Boolean operations while executing floating-point math functions. Firmware flash compatibility supports up to 512 program blocks and reference table bulk memory accessing. The CPU draws 1.0 A at +5 VDC and 1.25 A at +3.3 VDC from the backplane, relying on an external battery pack to retain 10 MB of RAM user memory during system power outages.

Frequently Asked Questions

Q: What are the backplane power supply current requirements for the IC695CMU310 CPU?

A: The module requires 1.0 A at +5 VDC and 1.25 A at +3.3 VDC from the RX3i backplane power supply.

Q: Which serial communication protocols are natively supported on the embedded serial ports?

A: The onboard RS-232 and RS-485 ports natively support Modbus RTU Slave, SNP, and Serial I/O protocols.

Q: How is the execution mode of the processor controlled manually on the front panel?

A: Hardware mode selection is managed via a 3-position toggle switch located on the front panel alongside diagnostic LED status indicators.

Field Installation Guidelines

De-energize and lock out all backplane power supplies before inserting or removing the CPU from the baseplate rack.
Connect the lithium battery pack to the CPU battery connector to ensure non-volatile user RAM retention prior to installation.
Align the single-slot CPU module with the dedicated CPU slot in the RX3i universal backplane and seat the rear PCI connector completely.
Tighten panel retention screws to secure the unit against backplane vibration and ensure frame grounding.
Wire serial communication cables using shielded twisted-pair conductors, terminating shields at a single chassis ground point to avoid ground loops.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.