IC698CRE040 GE Fanuc PACSystems RX7i Datasheet & Technical Manual

IC698CRE040 GE Fanuc PACSystems RX7i Processor Module

IC698CRE040 GE Fanuc PACSystems RX7i Processor Module

Disponibilidad: 10 Quedan en stock

Configured for high-availability redundancy and centralized logic execution in PACSystems RX7i platforms, the GE Fanuc IC698CRE040 (IC698CRE040 Central Processing Unit)...

Código: IC698CRE040

Manufacturer: GE Fanuc
Product No.: IC698CRE040
Product Type: CPU Processors
Product Origin: USA
Payment:T/T, Western Union
Weight: 680g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Configured for high-availability redundancy and centralized logic execution in PACSystems RX7i platforms, the GE Fanuc IC698CRE040 (IC698CRE040 Central Processing Unit) provides direct physical/electrical execution.

Hardware Specifications

Parameter	Specification
Model	IC698CRE040
Brand	GE Fanuc Emerson
Origin	United States
Weight	1.50 lbs (0.68 kg)
Dimensions	Standard VME64/RX7i rack single-slot module
Operating Temp	0 to 60 deg C
Power Consumption	+5 VDC: 6.8 A nominal; +12 VDC: 0.003 A nominal; -12 VDC: 0.003 A nominal
Processor Architecture	Intel Pentium M, 1.8 GHz clock speed
Execution Speed	0.024 ms per 1000 Boolean contacts/coils
Memory Capacity	64 MB User RAM / 64 MB Non-volatile flash storage
Serial Interfaces	Two (2) ports (RS232 / RS485 supporting Modbus RTU Slave, SNP, Serial I/O)
Ethernet Interfaces	Two (2) RJ45 auto-sensing 10/100 Mbps ports + One (1) Station Manager port
Ethernet Protocols	EGD, SRTP, Modbus TCP Server/Client, SNTP time synchronization
User Logic Capacity	Up to 512 blocks (maximum 128 KB per block)
Configuration Software	Proficy Machine Edition / Logic Developer PLC

Backplane Bus Communication Velocity and System Redundancy

The IC698CRE040 leverages high-speed VME64 backplane bus communication velocity to manage real-time I/O scanning and synchronized redundancy states across PACSystems RX7i architectures. Operating on an Intel Pentium M 1.8 GHz processing core, the module coordinates dual Ethernet ports and serial channels while executing user application code written in Ladder Diagram, C, Structured Text, or Function Block Diagram. Firmware flash compatibility ensures seamless operating system updates and deterministic networking performance across EtherNet/IP and EGD infrastructures.

Frequently Asked Questions

Q: What are the backplane power supply current requirements for the IC698CRE040 CPU?

A: The module draws a nominal 6.8 Amps at +5 VDC, 0.003 Amps at +12 VDC, and 0.003 Amps at -12 VDC directly from the RX7i backplane power supply.

Q: How does the IC698CRE040 handle redundancy synchronization in high-availability configurations?

A: The processor utilizes dedicated communication channels to exchange system state data and memory images between primary and backup controllers, executing hot-standby failover without disturbing process control loops.

Q: What network connection limits apply to the embedded Ethernet interfaces?

A: The embedded dual RJ45 Ethernet ports support up to 16 combined web server and FTP connections, up to 255 EGD configuration-based pages, and time synchronization via SNTP.

Field Installation Guidelines

De-energize the PACSystems RX7i rack chassis before inserting or removing the CPU processor module.
Align the IC698CRE040 circuit board with the top and bottom card guides of the designated CPU slot in the RX7i rack.
Slide the module firmly into the chassis until the backplane connectors fully seat into the multi-pin backplane header.
Tighten the top and bottom captive retaining screws to lock the module into the rack frame and verify chassis ground continuity.
Connect twisted-pair industrial Ethernet cables (CAT5e or higher) to the RJ45 ports and shield grounding pins according to standard EMI suppression practices.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.