IS200TBCIS2CCD GE Control Circuit Board

IS200TBCIS2CCD | GE | Control Terminal Board

IS200TBCIS2CCD | GE | Control Terminal Board

Disponibilidad: 10 Quedan en stock

The GE IS200TBCIS2CCD, also cataloged as the IS200TBCI Control Terminal Board, operates as a dedicated hardware component for field signal...

Código: IS200TBCIS2CCD

Manufacturer: GE Fanuc
Product No.: IS200TBCIS2CCD
Product Type: Terminal Boards
Product Origin: USA
Payment:T/T, Western Union
Weight: 1000g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The GE IS200TBCIS2CCD, also cataloged as the IS200TBCI Control Terminal Board, operates as a dedicated hardware component for field signal termination and I/O distribution within GE Mark VI Speedtronic platforms. The board conditions discrete and analog input/output signals, connecting field transmitters and actuators directly to internal VMEbus I/O packs.

Hardware Specifications

Parameter	Specification
Model	IS200TBCIS2CCD (IS200TBCI)
Brand	GE (General Electric)
Origin	USA
Weight	2.2 lbs (1.0 kg)
Dimensions	13.39 in x 8.50 in x 2.17 in (340 mm x 216 mm x 55 mm)
Operating Temp	-40 to 85 deg C
Power Consumption	10 W
Nominal Voltage	24 VDC
Input/Output Points	32 channel points
Communication Interface	Ethernet, RS-232, and dedicated system bus
Humidity	5% to 95% (non-condensing)

Deterministic Network Backplane Bus Velocity and I/O Density Scaling

The IS200TBCIS2CCD handles signal concentration across 32 discrete I/O channels to optimize backplane bus communication velocity across Mark VI control racks. Onboard filter networks suppress high-frequency line noise, preserving signal integrity during real-time data frame transfers. Supporting flexible I/O density scaling architectures, the unit integrates firmware flash compatibility to match connected controller rack configurations, maintaining synchronized operational states across simplex and redundant termination configurations.

Frequently Asked Questions

Q: How are field wiring connections landed on the IS200TBCIS2CCD?

A: Field wiring terminates directly onto barrier-style screw terminal blocks located on the board surface, interfacing to control racks via standard multi-pin cable harnesses.

Q: Can the IS200TBCIS2CCD be replaced while system power is applied?

A: Power to the specific terminal board and connected field loops must be isolated prior to removal to avoid signal disruptions or physical damage to onboard filter components.

Q: What mechanisms ensure noise immunity across the 32 input/output channels?

A: Onboard passive filtering networks and galvanic isolation circuits protect signal paths from electromagnetic interference and common-mode voltage surges.

Field Installation Guidelines

De-energize all primary 24 VDC power distribution feeds to the terminal board before initiating physical installation or wiring changes.
Wear an ESD grounding wrist strap connected to a bare metal frame surface during unit handling.
Secure the board to the panel DIN rail or mounting studs using standard mechanical fasteners to maintain structural earth ground contact.
Route low-voltage analog and discrete signal cables through separate wire ducts away from high-voltage AC lines to prevent inductive coupling.
Torque all terminal block screw connections to vendor specifications and ground shielded cable drain wires at the cabinet ground bus.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.