IS230TAISH2C GE Analog Input Board | New & Original Stock

IS230TAISH2C Mark VIe Simplex Analog Input Terminal Board | GE

IS230TAISH2C Mark VIe Simplex Analog Input Terminal Board | GE

Disponibilidad: 10 Quedan en stock

The GE IS230TAISH2C, also cataloged as the IS230TAIS Simplex Analog Input Terminal Board, operates as a dedicated hardware component for...

Código: IS230TAISH2C

Manufacturer: GE Fanuc
Product No.: IS230TAISH2C
Product Type: Terminal Boards
Product Origin: USA
Payment:T/T, Western Union
Weight: 300g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The GE IS230TAISH2C, also cataloged as the IS230TAIS Simplex Analog Input Terminal Board, operates as a dedicated hardware component for analog signal termination and distribution within GE Mark VIe control networks. Mounted on a DIN rail assembly, the board accepts 4-20 mA current loops, 0-10 VDC inputs, and 2-wire or 4-wire transmitter connections, interfacing field sensors directly to I/O pack modules.

Hardware Specifications

Parameter	Specification
Model	IS230TAISH2C (IS230TAIS)
Brand	GE (General Electric)
Origin	USA
Weight	0.3 kg (0.66 lbs)
Dimensions	15 cm x 9 cm x 11 cm
Operating Temp	-30 to 65 deg C
Power Consumption	Passive Board (Loop Power Supplied via I/O Pack/External Supply)
System Platform	GE Mark VIe Series
Assembly Type	DIN Rail Mount Assembly
Analog Inputs	Supports 4-20 mA, Voltage Inputs, 2-Wire / 4-Wire Transmitters
Terminal Interfaces	Screw-type Terminal Blocks, I/O Pack D-sub Connector

Deterministic Backplane Bus Velocity and I/O Density Scaling

The IS230TAISH2C provides high signal fidelity to preserve backplane bus communication velocity across the Mark VIe IONet architecture. Designed for compact panel layouts, the board optimizes I/O density scaling by routing multiple analog input channels through a single high-density connector interface. Integrated onboard passive filter networks ensure signal stabilization and firmware flash compatibility across attached I/O packs, preventing line noise from interfering with real-time analog-to-digital conversions.

Frequently Asked Questions

Q: How is the IS230TAISH2C physically secured in the control enclosure?

A: The board mounts directly onto standard 35 mm DIN rails via integrated locking clips, providing mechanical stability and earthing contact.

Q: Does the IS230TAISH2C contain active processing components or microprocessors?

A: No, the IS230TAISH2C functions as a passive field termination board that interfaces directly with an active Mark VIe I/O pack module for signal processing.

Q: How are field wiring shields managed on this termination assembly?

A: Shield wires terminate at designated ground terminals on the board assembly, which route high-frequency noise directly to the grounded DIN rail chassis.

Field Installation Guidelines

Disconnect all external loop power sources before connecting or disconnecting field wiring on the IS230TAISH2C assembly.
Snap the board securely onto a clean, grounded 35 mm DIN rail, verifying that the retaining clips engage completely.
Wear an ESD grounding wrist strap attached to an unpainted enclosure ground point during installation.
Route field analog input cables in dedicated low-voltage wiring troughs, separated from high-voltage AC power lines.
Tighten all field screw terminals to 0.5 Nm (4.4 in-lbs) and confirm D-sub cable connectors are fully screwed down to the I/O pack interface.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.