ANB10D-415/CU2T/NDEL Yokogawa Node Unit

Yokogawa ANB10D-415/CU2T/NDEL ESB Bus Node Unit

Yokogawa ANB10D-415/CU2T/NDEL ESB Bus Node Unit

Disponibilidad: 10 Quedan en stock

Yokogawa ANB10D-415/CU2T/NDEL Node Unit Configured for high-speed signal routing in CENTUM VP Distributed Control System platforms, the Yokogawa ANB10D-415/CU2T/NDEL (ANB10D...

Código: ANB10D-410/NDEL

Manufacturer: Yokogawa
Product No.: ANB10D-410/NDEL
Product Type: Node Interface Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 12000g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Yokogawa ANB10D-415/CU2T/NDEL Node Unit

Configured for high-speed signal routing in CENTUM VP Distributed Control System platforms, the Yokogawa ANB10D-415/CU2T/NDEL (ANB10D Node Unit) provides direct physical/electrical execution.

Suffix Breakdown & Model Matrix

ANB10D: Node Unit for Dual-Redundant ESB Bus
-4: Dual-redundant power supply configuration
1: 100 to 120 V AC power supply input
5: Basic type with no intrinsic explosion protection
/CU2T: Connector Unit with Terminator for ESB Bus [Part No. S9564FA (2 pieces included)]
/NDEL: Software license enablement for Node Expansion

Hardware Specifications

Parameter	Specification
Model	ANB10D-415/CU2T/NDEL
Brand	Yokogawa
Origin	Japan
Weight	12 kg (Shipping Weight) / Node Unit: approximately 6.0 kg
Dimensions	Standard rack-mount chassis configuration
Operating Temp	-20 deg C to +70 deg C (when continuous ISA G3 option is applied)
Power Consumption	100 to 120 V AC, 50/60 Hz supply
Bus Interface	Dual-redundant ESB Bus
Isolation	1500 V AC withstand voltage (bus-to-system)
Diagnostics	Integrated self-diagnostics with LED status indicators
Compatibility	CENTUM VP and ProSafe-RS control systems

DCS Process Control & Instrumentation Attributes

The ANB10D-415/CU2T/NDEL executes physical bus arbitration and deterministic communication over the dual-redundant ESB Bus backplane. Incorporating dual-redundant power supply modules, the unit ensures continuous communication and power distribution to down-rack I/O modules during individual utility line or supply-circuit failure. The /CU2T option integrates dual S9564FA connector units equipped with physical terminal networks, suppressing transmission line reflection and maintaining signal integrity over extended FIO rack configurations.

Frequently Asked Questions

Q: What function does the /NDEL suffix option perform on the ANB10D node?

A: The /NDEL option supplies the designated software expansion license, unlocking the firmware capability required to recognize and address auxiliary expansion nodes connected downstream.

Q: Can this unit operate inside hazardous areas requiring intrinsic safety rating?

A: No. Suffix "5" specifies a basic type containing no intrinsic explosion protection. If input/output signals originate from hazardous environments, external isolated barrier cards must be utilized between the node I/O modules and field instruments.

Q: How is the physical ESB Bus terminated on the ANB10D-415/CU2T/NDEL?

A: Termination is executed via the /CU2T option, which supplies two hardware terminator plug blocks (S9564FA) that lock onto the dedicated ESB Bus interfaces to terminate the bus impedance.

Field Installation Guidelines

Mounting Protocol: Install the node unit into standard 19-inch instrument racks. Secure all mounting screws to the cabinet frame to ensure a solid mechanical and electrical ground reference.
Power Connections: Route dual independent 100 to 120 V AC lines to the redundant power supplies. Ground the chassis directly to the primary instrument protective earth (PE) busbar.
Cable Routing: Connect the ESB Bus cables to the /CU2T connectors. Do not exceed the maximum allowed physical bending radius of the communication cables to prevent transmission impedance mismatch.
Environmental Control: Verify that cabinet cooling maintains ambient conditions below 70 deg C (or 60 deg C for optimal components lifespan) to prevent diagnostic faults or thermal drift within adjacent analog modules.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.