330104-00-20-05-02-00 Bently Nevada Proximity Probe

Bently Nevada 330104-00-20-05-02-00 3300 XL 8 mm Proximity Probes

Bently Nevada 330104-00-20-05-02-00 3300 XL 8 mm Proximity Probes

Disponibilidad: 10 Quedan en stock

The Bently Nevada 330104-00-20-05-02-00, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for non-contacting vibration...

Código: 330104-00-18-10-02-00

Manufacturer: Bently Nevada
Product No.: 330104-00-18-10-02-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 1500g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The Bently Nevada 330104-00-20-05-02-00, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for non-contacting vibration and displacement measurements within the 3300 XL Proximity Transducer System.

Hardware Specifications

Parameter	Specification
Model	330104-00-20-05-02-00
Brand	Bently Nevada
Origin	U.S.A.
Weight	0.323 kg
Shipping Weight	1.5 kg
Unthreaded Length	0 mm
Overall Case Length	200 mm
Total Length	5.0 meters (16.4 feet)
Connector / Cable Type	Miniature coaxial ClickLoc connector, standard cable
Agency Approval	Not required
Probe Tip Material	Polyphenylene sulfide (PPS)
Probe Case Material	AISI 303 or 304 stainless steel (SST)
Operating Temp	-51 deg C to +177 deg C (-60 deg F to +351 deg F)

Eddy-Current Probe Scaling and Gap Voltage Validation

The 3300 XL 8 mm proximity probe relies on eddy-current technology to determine the physical dynamic or static distance between the probe tip and a conductive target surface. Accurate system scaling requires correct calibration to a specific target material (typically AISI 4140 steel) to achieve a nominal scale factor of 7.87 V/mm (200 mV/mil). During physical loop commissioning, engineers must perform gap voltage validation to ensure the probe operates within its linear range. The target DC gap voltage is typically adjusted to -10 VDC, corresponding to the midpoint of the linear displacement envelope. Proper calibration mitigates signal cross-talk suppression issues when multiple probe cases are installed in close proximity within a machine housing, ensuring that overlapping electromagnetic fields do not introduce errors into the rotor dynamics data stream.

Frequently Asked Questions

Q: What is the significance of the -10 VDC target during physical installation?

A: The -10 VDC value represents the electrical midpoint of the linear range for the 3300 XL 8 mm transducer system. Setting the probe gap to this voltage ensures equal dynamic range for both positive and negative target displacements without clipping the output signal.

Q: Can the ClickLoc connector be disassembled or modified in the field?

A: No, the ClickLoc connector is factory-terminated to maintain precise physical impedance and environmental sealing. Modifying the connector assembly in the field alters the electrical length and total capacitance of the coaxial line, which corrupts the scale factor and system calibration.

Field Installation Guidelines

Mechanical Mounting and Torque: Thread the probe case into the bracket or housing by hand until the correct physical gap or nominal -10 VDC gap voltage is indicated on a digital voltmeter. Do not exceed the maximum rated installation torque for the AISI 303/304 stainless steel case to prevent mechanical distortion.
Coaxial Cable Routing and Bend Radius: Maintain a minimum bend radius of 25.4 mm (1.0 inch) for the standard extension cable. Avoid sharp bends, pinches, or routing parallel to high-voltage AC lines to minimize electromagnetic interference and cross-talk suppression issues.
Connector Torque and Insulation: Connect the ClickLoc miniature coaxial fittings firmly by hand. Use clear heat-shrink tubing or dedicated connector protectors to electrically isolate the connection point from structural machine ground, preventing ground loop interference.
Target Engagement: Ensure a minimum 5-to-1 engagement ratio for any threaded structural mounting fixtures to verify long-term physical stability against high rotor dynamics or casing vibration.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.