330105-02-12-05-02-05 Bently Nevada Proximity Probe

Bently Nevada 330105-02-12-05-02-05 3300 XL 8mm Proximity Transducer System

Bently Nevada 330105-02-12-05-02-05 3300 XL 8mm Proximity Transducer System

Disponibilidad: 10 Quedan en stock

The Bently Nevada 330105-02-12-05-02-05, also cataloged as the 330105 Proximity Transducer System, operates as a dedicated hardware component for high-precision vibration monitoring within...

Código: 330105-02-12-05-02-05

Manufacturer: Bently Nevada
Product No.: 330105-02-12-05-02-05
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 1500g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The Bently Nevada 330105-02-12-05-02-05, also cataloged as the 330105 Proximity Transducer System, operates as a dedicated hardware component for high-precision vibration monitoring within Bently Nevada 3300 XL machine monitoring platforms.

Suffix Breakdown & Model Matrix

330105: 3300 XL 8 mm Reverse Mount Probe (M10 x 1 thread)
-02: Unthreaded Length Option (2.0 in)
-12: Overall Case Length Option (1.2 in)
-05: Total Length Option (0.5 meter / 1.6 feet)
-02: Miniature ClickLoc coaxial connector
-05: Multiple Agency Approvals

Hardware Specifications

Parameter	Specification
Model	330105-02-12-05-02-05
Brand	Bently Nevada
Origin	USA
Weight	0.23 kg
Dimensions	20.4 cm x 22.2 cm x 3.7 cm
Operating Temp	-51 deg C to +177 deg C
Power Consumption	Passive sensor (driven by 3300 XL Proximitor Sensor)
Probe Diameter	8 mm
Connector Type	Gold-plated ClickLoc coaxial connector
Total Length	0.5 meter (1.6 feet)
System Compatibility	3300 XL 8mm Proximity Transducer System

Mechanical Monitoring & TSI Technical Attributes

The 330105 reverse mount probe requires precise eddy-current probe scaling to ensure linear voltage output across the standard 80 mil (2.0 mm) sweep range. During commissioning, gap voltage validation must target a nominal -10 VDC baseline, corresponding to the center of the calibrated linear range when referenced against a 4140 steel target. The gold-plated ClickLoc coaxial connector incorporates an internal locking mechanism engineered for cross-talk suppression and continuous shielding termination. This design isolates high-frequency rotor dynamics from structural electromagnetic interference, ensuring signal integrity across the 0.5 meter physical lead length prior to Proximitor input interface.

Frequently Asked Questions

Q: What is the critical torque specification for installing the reverse mount probe housing?

A: The M10 x 1 threaded probe body must be torqued to a maximum of 33.9 N-m (300 in-lb) within the housing assembly to prevent mechanical deformation of the internal eddy-current coil structure.

Q: Can this 0.5 meter probe be connected directly to a standard 3500/22M monitor interface?

A: No. The probe requires a matching 3300 XL extension cable to achieve a total system electrical length of either 5.0 meters or 9.0 meters, which matches the precise tuning calibration of the corresponding 3300 XL Proximitor Sensor.

Q: How does the ClickLoc connector handle fluid or chemical exposure in the field?

A: The gold-plated ClickLoc connector provides mechanical connection reliability, but fluid immersion requires application of oil-proof fluorosilicone self-fusing tape or explicit connector protector sleeves to block ambient moisture and oil ingress.

Field Installation Guidelines

Ensure the machine is in a non-operational state. Verify the target area on the rotor surface is free from deep mechanical scores, magnetic runout, or chrome plating variations exceeding 0.25 micrometers.
Thread the reverse mount probe body into the sleeve housing. Adjust the physical gap while reading the gap voltage from the Proximitor sensor output using a calibrated digital multimeter.
Target a physical voltage of -10.0 VDC (+/- 0.5 VDC) at the designated machine rest state to position the transducer in the center of its linear range.
Secure the locknut to prevent drift caused by operational machine vibration. Route the 0.5 meter integral cable through rigid or flexible conduit, ensuring minimum bend radius rules of 25.4 mm (1.0 in) are maintained.
Connect the ClickLoc interface to the extension cable. Ensure the terminal connection clicks fully into place, and insulate the junction from structural metal components using non-conductive sleeving.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.