9771-210 Triconex Communication Module

Communication Interface Modules | Triconex 9771-210

Communication Interface Modules | Triconex 9771-210

التوفر: 20 متوفر في المخزون

Triconex 9771-210 Communication Interface Module Configured for facilitating communication between controllers and external host networks, the Triconex 9771-210 (9771-210 Communication...

رمز المنتج: 9771-210

Manufacturer: ICS Triplex
Product No.: 9771-210
Product Type: Communication Interface Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 1200g
Shipping port: Xiamen
Warranty: 12 months

وصف التقييمات

Triconex 9771-210 Communication Interface Module

Configured for facilitating communication between controllers and external host networks, the Triconex 9771-210 (9771-210 Communication Interface Module) provides direct physical/electrical execution.

Hardware Specifications

Parameter	Specification
Model	9771-210
Brand	Triconex
Origin	United States
Weight	1.2 kg
Dimensions	6.2 cm x 42.0 cm x 17.7 cm
Operating Temp	0 to 60 deg C
Storage Temp	-40 to +85 deg C
Relative Humidity	5 to 95%, non-condensing
Power Consumption	8 W
Operating Voltage	24 VDC nominal (18 to 32 VDC range)
Communication Ports	RS-232, RS-485, Ethernet (10/100 Mbps)
Supported Protocols	Modbus RTU, Modbus TCP/IP, peer-to-peer Triconex protocol
Safety Certification	IEC 61508 SIL 3 compliant

Triple Modular Redundancy and Fail-Safe State Execution

The hardware incorporates a structured Triple Modular Redundant (TMR) architecture to execute continuous, fault-tolerant data transmission with distributed control systems (DCS), human-machine interfaces (HMIs), and plant historians. Three independent communication pathways manage concurrent data verification processes, routing individual frames through an internal hardware voting mechanism to protect the system against single-point bus failures. This fault-tolerant configuration guarantees adherence to IEC 61508 SIL 3 safety standards by enforcing absolute galvanic isolation between internal backplane logic and external field fieldbus networks, preventing external voltage disruptions from compromising safety instrumented functions.

Frequently Asked Questions

Q: Does online extraction of the module trigger communication dropouts across the remaining system nodes?

A: No. The architecture provides full hot-swap capability, allowing engineers to replace a faulty module without taking the safety controller offline or interrupting active peer-to-peer communications sustained by redundant modules.

Q: What are the maximum serial and Ethernet data transmission velocities supported by the hardware ports?

A: The serial RS-232 and RS-485 interfaces deliver data rates up to 115.2 kbps, while the integrated copper Ethernet port executes deterministic throughput up to 100 Mbps.

Q: How does the module handle internal parity errors or external link loss diagnostics?

A: Onboard diagnostic sub-assemblies run real-time hardware integrity checks and continuous error logging. The system instantly detects communication timeout or link loss, shifting the affected port to a safe state while notifying the host processor.

Field Installation Guidelines

Chassis Slot Alignment: Verify correct mechanical keying configuration within the slot before inserting the module into the active rack frame to prevent pin misalignments.
Shield Grounding Connections: Connect all external RS-485 and RS-232 serial cable shields to the dedicated plant instrumentation earth bar, using single-point grounding methods to eliminate ground loop current induction.
Ethernet Line Separation: Route copper network communication links through dedicated low-voltage wireways separate from high-voltage AC/DC power lines to suppress electromagnetic cross-talk.
Firmware Verification: Confirm that the internal module firmware version exactly matches the current runtime project configuration compiled within the active safety controller database prior to initialization.

ماذا يقول عملاؤنا عنا؟

دعم طوارئ ممتاز!

تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.

مارك تومسون

مدير الصيانة، الولايات المتحدة الأمريكية

مصدر موثوق لقطع الغيار الجديدة

يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.

روبرت هوفمان

رئيس قسم الهندسة، ألمانيا

خدمة وجودة من الدرجة الأولى

نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.