IC697PWR724 GE Series 90-70 Power Supply

GE Fanuc IC697PWR724 Series 90-70 Power Supply Module

GE Fanuc IC697PWR724 Series 90-70 Power Supply Module

Disponibilidad: 10 Quedan en stock

The GE Fanuc IC697PWR724, also cataloged as the IC697PWR724 Power Supply Module, operates as a dedicated hardware component for stable...

Código: IC697PWR724

Manufacturer: GE Fanuc
Product No.: IC697PWR724
Product Type: Power Supply Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 1130g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The GE Fanuc IC697PWR724, also cataloged as the IC697PWR724 Power Supply Module, operates as a dedicated hardware component for stable DC voltage distribution and system backplane powering within Series 90-70 VME rack systems.

Hardware Specifications

Parameter	Specification
Model	IC697PWR724
Brand	GE Fanuc Emerson
Product Line	Series 90-70
Origin	USA
Weight	2.50 lbs (1.13 kg)
Dimensions	Standard Series 90-70 single-slot module width
Operating Temp	0 to 60 deg C
Power Consumption	160 Watts
Nominal Rated Voltage	24 VDC
Input Voltage Range	18 to 32 VDC
Input Inrush Energy	22 J maximum
Output Power	90 Watts maximum
Output Voltage	+5 VDC, +12 VDC, and -12 VDC
Overvoltage Limit	5 VDC output overvoltage protection limit
Ride-Through Time	10 ms
Backplane Compatibility	VME Compatible

Backplane Bus Communication Velocity & Power Distribution

The IC697PWR724 module features dedicated internal power conversion circuitry tailored for high-density Series 90-70 backplane configurations. It delivers regulated +5 VDC logic power alongside auxiliary +12 VDC and -12 VDC rails to feed input/output circuits and processing cards across the backplane bus. System firmware flash compatibility and deterministic backplane communication velocity across the VME architecture rely on low-ripple output voltages during transient load demands. The internal power stage incorporates a controlled input inrush energy circuit rated up to 22 J to mitigate voltage sag on the primary 24 VDC feeder bus during initial system energization.

Frequently Asked Questions

Q: Can the IC697PWR724 module supply power to expansion racks in a Series 90-70 system?

A: Yes, the IC697PWR724 can provide power to a second rack in single or expansion configurations, provided the combined power drain across all connected rails does not exceed the maximum output limit of 90 Watts.

Q: What is the behavior of the supply during short primary power interruptions?

A: The module maintains a minimum ride-through time of 10 ms under full load conditions, permitting execution of hold-up functions before system power failure logic triggers.

Q: Is hot-swapping permitted for the IC697PWR724 module during backplane operation?

A: No, primary 24 VDC input power must be isolated and the backplane de-energized prior to inserting or removing the power supply module to prevent electrical arcing and backplane bus signal corruption.

Field Installation Guidelines

Verify that incoming DC power wires are de-energized and tagged out prior to terminal connection. Ensure the supply line voltage remains strictly within the specified 18 to 32 VDC window.
Align the module card edges with the designated rack slot guides of the Series 90-70 chassis. Slide the module firmly into place until the backplane connectors seat completely.
Tighten the top and bottom retaining screws to secure the chassis ground bond and prevent physical displacement due to vibration.
Wire primary 24 VDC input power using appropriate wire gauges, ensuring strict adherence to polarity and shield grounding standards to eliminate ground loops.
Provide a minimum clearance of 50 mm above and below the rack chassis to ensure adequate convection airflow across thermal dissipation surfaces.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.