- +8618030270289
- Ubicación de la tienda
HIMA B9302-0.5 Power Supply Module
The HIMA B9302-0.5, also cataloged as the B9302-0.5 Power Supply Module, operates as a dedicated hardware component for supplying regulated internal bus logic power within HIQuad 16 IO slot rack platforms.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | B9302-0.5 |
| Brand | HIMA |
| Origin | Germany |
| Weight | 0.45 kg |
| Dimensions | 172 x 110 x 41 mm |
| Operating Temp | -20 to +60 deg C |
| Power Consumption | 24 VDC nominal supply input |
| Output Voltage | 5 VDC regulated |
| Output Current | 0.5 A |
| Power Rating | 2.5 W |
| Functional Safety Rating | IEC 61508 SIL3, TÜV certified |
| Diagnostics | Status LEDs for power and fault condition |
| Protection Features | Overload, short-circuit, thermal protection |
| Mounting Type | Subrack rack-mounted (HIQuad 16 IO slot rack) |
SIL3 Certification & Fail-Safe State Execution
The HIMA B9302-0.5 power supply module incorporates input-to-output galvanic isolation to decouple incoming 24 VDC plant distribution circuits from sensitive 5 VDC internal processor logic. Built in compliance with IEC 61508 SIL3 safety standards, the internal regulation loops continuously verify output voltage thresholds and thermal levels.
In the event of an input power transient, short circuit, or thermal excursion, built-in diagnostic and protection circuits intervene immediately. When operating in a redundant power supply unit configuration, the module maintains parallel load sharing and facilitates fail-safe state execution without interrupting system backplane power or triggering false shut-down sequences across adjacent I/O modules.
Frequently Asked Questions
Q: How does the power module support fault tolerance in a redundant configuration?
A: Dual modules can operate in parallel sharing mode; if one supply fails or experiences an input voltage loss, the surviving unit seamlessly maintains the 5 VDC regulated output without logic drops.
Q: What primary protection circuits safeguard the module against field wiring faults?
A: The module integrates active short-circuit protection, output overvoltage clamping, and thermal shutdown circuits that isolate internal power rails during abnormal fault conditions.
Q: Does the 5 VDC output maintain galvanic isolation from the primary 24 VDC input supply?
A: Yes. High-level input circuits remain galvanically isolated from the regulated 5 VDC internal bus to prevent external field surges from damaging central processing units.
Field Installation Guidelines
Slide the module directly into its assigned subrack slot within the HIQuad 16 IO slot rack until the backplane connectors sit fully engaged. Secure all chassis retention screws to verify grounding continuity. Maintain a minimum vertical clearance of 50 mm above and below the rack frame to allow natural convection cooling across the -20 to +60 deg C operating temperature spectrum.
Route 24 VDC power supply cabling through designated wire ducts, keeping them physically separated from high-voltage AC conductors and drive wiring. Terminate cable shielding directly to a low-impedance master ground bar. Verify supply voltage parameters and terminal screw tightness before powering the rack.
¿Qué dicen nuestros clientes sobre nosotros?
¡Excelente soporte de emergencia!
Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.
Mark Thompson
Gerente de Mantenimiento, EE. UU.Fuente confiable de repuestos nuevos
Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.
Robert Hoffmann
Jefe de ingeniería, AlemaniaServicio y calidad de primer nivel
Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.
Lucas Müller
Director de Operaciones, AlemaniaProductos relacionados
Módulo de alimentación redundante FIO Yokogawa ATRBS-00 S2
$99.00
$199.00
Módulo de fuente de alimentación de CA | ICS TRIPLEX T830
$99.00
$199.00
Módulos de fuente de alimentación Yokogawa PW482-S01 CENTUM
$99.00
$199.00
Tarjeta de fuente de alimentación Yokogawa S9763BH-05 MS08*B
$99.00
$199.00
Módulo de fuente de alimentación Yokogawa PW301-S4 CENTUM CS
$99.00
$199.00
Módulo de potencia Yokogawa VF311 aplicable a CENTUM VP
$99.00
$199.00
Fuentes de alimentación reguladas Yokogawa PS13*B
$99.00
$199.00
EB401-50 Yokogawa | Módulos de fuente de alimentación
$99.00
$199.00
Translation missing: es.general.search.loading