IC200PWR002 GE VersaMax Power Supply Datasheet

IC200PWR002 GE VersaMax Power Supply Module

IC200PWR002 GE VersaMax Power Supply Module

Disponibilidad: 10 Quedan en stock

Configured for primary or booster backplane power delivery in VersaMax systems, the GE IC200PWR002 (IC200PWR002 Power Supply Module) provides direct...

Código: IC200PWR002

Manufacturer: GE Fanuc
Product No.: IC200PWR002
Product Type: Power Supply Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 140g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Configured for primary or booster backplane power delivery in VersaMax systems, the GE IC200PWR002 (IC200PWR002 Power Supply Module) provides direct physical/electrical execution. Operating within an input voltage range of 18 to 30 VDC (24 VDC nominal), the unit converts input power to generate dual regulated output buses of 5 VDC and 3.3 VDC. The module delivers a maximum total output current of 1.5 A across both buses (up to 1.0 A at 3.3 VDC and up to 1.5 A minus 3.3 V power consumption at 5 VDC) to power backplane logic for CPUs, Network Interface Units (NIUs), and I/O expansion racks.

Hardware Specifications

Parameter	Specification
Model	IC200PWR002
Brand	General Electric
Origin	USA
Weight	0.14 kg (0.31 lbs)
Dimensions	49 mm x 133.4 mm x 39 mm
Operating Temp	0 to 60 deg C
Power Consumption	11 W max input power
Nominal Input Voltage	24 VDC
Input Voltage Range	18 to 30 VDC
Output Voltages	5 VDC and 3.3 VDC backplane rails
Total Output Current	1.5 A maximum combined
3.3V Output Current Limit	1.0 A maximum
5V Output Current Limit	1.5 A maximum (minus 3.3V current draw)
Holdup Time	10 ms minimum
Inrush Current	20 A for 6 ms at 24 VDC / 25 A for 6 ms at 30 VDC
Extended Power	Yes
Isolated Power	No
Circuit Protection	Short circuit, overload, reverse polarity

Deterministic Network Backplane Power Integrity & I/O Scaling

The IC200PWR002 enforces stable power delivery across the VersaMax backplane bus, maintaining consistent logic voltage thresholds required for Profinet and EtherNet/IP deterministic networks. By accommodating extended power demands, the supply prevents voltage droop on CPU and NIU drops during peak I/O density scaling. Integrated hardware protection circuits preserve firmware flash compatibility during live load fluctuations, suppressing power-induced bus dropouts and maintaining lockstep communication execution.

Frequently Asked Questions

Q: What is the primary difference between using the IC200PWR002 on a CPU/NIU base versus a booster carrier?

A: When mounted on a CPU or NIU base, the IC200PWR002 functions as the primary power supply for the main rack. When installed on a power supply booster carrier, it operates as a secondary supplemental power supply to expand downstream I/O backplane capability.

Q: How are the front-panel screw terminals wired for power input?

A: The bottom front panel features 5 screw-type terminals: the two left-most terminals are assigned to +DC and -DC input power, the 3rd terminal connects to frame ground (earth), and the final two terminals require no connection.

Q: Does the IC200PWR002 include integrated isolation between input and output power circuits?

A: No. The IC200PWR002 does not feature isolated power output circuitry. External field power isolation must be maintained upstream if galvanic isolation between field DC power and logic ground is required.

Field Installation Guidelines

Safety Isolation: Ensure all main 24 VDC supply sources are switched off prior to mounting, removing, or terminating wiring to the power supply module.
Terminal Wiring: Connect the 24 VDC input power leads to the designated +DC and -DC screw terminals on the bottom front panel. Tighten terminal connections to recommended industrial torque standards.
Grounding: Wire the 3rd terminal on the bottom terminal block directly to functional protective earth (PE) ground to ensure proper surge clamping and noise immunity.
Mechanical Mounting: Align the module housing over the primary baseplate or booster carrier guide channels and push firmly until the locking tab snaps into position.
Inrush Protection: Verify that upstream DC power sources and fusing can sustain an inrush current pulse of up to 25 A for 6 ms during cold startup without tripping.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.