IC200PWR102 GE Fanuc Power Supply Module

IC200PWR102 GE Fanuc VersaMax Power Supply Module

IC200PWR102 GE Fanuc VersaMax Power Supply Module

Disponibilidad: 10 Quedan en stock

Configured for backplane power distribution in VersaMax system platforms, the GE Fanuc IC200PWR102 (IC200PWR102 Power Supply Module) provides direct physical/electrical...

Código: IC200PWR102

Manufacturer: GE Fanuc
Product No.: IC200PWR102
Product Type: Power Supply Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 140g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Configured for backplane power distribution in VersaMax system platforms, the GE Fanuc IC200PWR102 (IC200PWR102 Power Supply Module) provides direct physical/electrical execution. The module converts AC mains input power into regulated 5 VDC and 3.3 VDC system buses to power attached CPUs, Network Interface Units (NIUs), and expansion I/O modules.

Hardware Specifications

Parameter	Specification
Model	IC200PWR102
Brand	GE Fanuc
Origin	USA
Weight	0.31 lbs (0.14 kg)
Dimensions	Single-slot VersaMax module footprint
Operating Temp	0 deg C to 60 deg C
Power Consumption	27 VA input power
Input Voltage Ranges	85-132 VAC (120 VAC nominal) / 176-264 VAC (240 VAC nominal)
Input Frequency	47 to 63 Hz
Voltage Selection	Jumper installed: 120 VAC; Jumper uninstalled: 240 VAC
Output Voltages	5 VDC and 3.3 VDC
Maximum Output Current	1.5 A total (up to 1.5 A @ 5 VDC, up to 1.0 A @ 3.3 VDC)
Holdup Time	20 ms
Built-in Protection	Short circuit and overload protection

Backplane Bus Communication Velocity & Firmware Flash Compatibility

The module executes direct power injection to the VersaMax system backplane, supplying up to 1.5 A combined current across the internal 5 VDC and 3.3 VDC buses. It operates either as the primary system power supply or as a supplemental booster supply mounted on a Power Supply Booster carrier. The unit maintains voltage regulation during momentary power losses with a 20 ms holdup time. Overload and short-circuit protection circuits continuously monitor output parameters to preserve backplane voltage integrity.

Frequently Asked Questions

Q: How is the input voltage selection set between 120 VAC and 240 VAC on the IC200PWR102?

A: A hardware terminal jumper on the unit controls the range: installing the jumper selects 120 VAC nominal (85-132 VAC), while omitting the jumper selects 240 VAC nominal (176-264 VAC).

Q: What is the total maximum combined output current supplied to the backplane?

A: The combined total output current across both 5 VDC and 3.3 VDC rails cannot exceed 1.5 A maximum.

Q: Can the IC200PWR102 be used in expansion configurations?

A: Yes, it can serve as a primary power module or as a secondary supply when attached to a VersaMax Power Supply Booster carrier.

Field Installation Guidelines

Confirm that AC input power is de-energized before mounting or wiring the module carrier.
Verify hardware jumper configuration prior to applying voltage: install the jumper for 120 VAC mains or remove it completely for 240 VAC operation.
Wire incoming AC line, neutral, and protective earth conductors securely to the designated terminals.
Mount the module chassis firmly onto the VersaMax base carrier until the retaining mechanisms snap into place.
Apply input power and verify proper backplane startup and status indicators.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.