AMN31 YOKOGAWA CENTUM Series Datasheet & Technical Manual

YOKOGAWA AMN31 CENTUM CS 3000 Nest for Terminal I/O Module

YOKOGAWA AMN31 CENTUM CS 3000 Nest for Terminal I/O Module

Disponibilidad: 10 Quedan en stock

YOKOGAWA AMN31 Nest for Terminal I/O Module Configured for signal consolidation and termination in CENTUM series platforms, the YOKOGAWA AMN31...

Código: AMN31

Manufacturer: Yokogawa
Product No.: AMN31
Product Type: Terminal I/O Modules
Product Origin: Japan
Payment:T/T, Western Union
Weight: 900g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

YOKOGAWA AMN31 Nest for Terminal I/O Module

Configured for signal consolidation and termination in CENTUM series platforms, the YOKOGAWA AMN31 (AMN31 Nest for Terminal I/O Module) provides direct physical signal aggregation for multi-channel I/O operations.

Hardware Specifications

Parameter	Specification
Model	AMN31
Brand	YOKOGAWA
Origin	Japan
Weight	0.9 kg
Dimensions	12.7 cm x 15.2 cm x 25.4 cm
Operating Temp	-20 deg C to +70 deg C
Power Consumption	< 10 W
Channel Capacity	32 I/O points
Connector Type	32-pin female industrial standard
System Compatibility	CENTUM CS 3000, CENTUM VP
Protection Rating	IP20

Process Control Integration and Connectivity

The AMN31 module serves as a critical junction for field signal management, specifically engineered to support 4-20 mA HART loop protocol environments when integrated with corresponding signal conditioners. By utilizing a connector-based backplane architecture, the unit facilitates modular signal routing, which minimizes the necessity for point-to-point hardwiring. Channel-to-channel isolation is maintained through the mechanical interface design, preventing potential ground loops and common-mode noise propagation between connected analog and digital signal strings. The integration with CENTUM series backplanes ensures high-density signal throughput while preserving the integrity of low-level process variable data.

Frequently Asked Questions

Q: Does the AMN31 module support hot-swap operations during system runtime?

A: No, the AMN31 lacks hot-swap capability. The module requires a full system shutdown and removal of backplane power prior to extraction or replacement to prevent electrical arcing and data bus interference.

Q: What are the primary grounding requirements for the AMN31 connector nest?

A: The chassis must be bonded to the cabinet's protective earth (PE) rail using a low-impedance copper braid. Ensure that shielded field cables utilize a 360-degree termination at the cable entry point to maintain electromagnetic compatibility (EMC) standards.

Field Installation Guidelines

Mechanical Mounting: Secure the module within the designated slot of the CENTUM rack using the provided mounting fasteners. Ensure the backplane connectors are seated flush to prevent intermittent contact resistance.
Wiring Standards: Use shielded twisted-pair cabling for all analog signals. Maintain a minimum separation of 100 mm between signal leads and high-voltage power lines to mitigate inductive coupling.
Environmental Constraints: This component is rated for IP20 environments. It must be installed inside an NEMA 12 or IP54 rated enclosure to prevent exposure to conductive dust, excessive humidity, or corrosive atmospheres.
Cable Termination: Verify that the 32-pin female connector pins are free of debris before mating. Tighten all field wiring terminals to the torque specifications provided by the connector manufacturer to ensure long-term mechanical stability.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.