EC401-10 S2 Yokogawa CENTUM VP Datasheet & Technical Manual

Yokogawa EC401-10 S2 CENTUM VP Bus Coupler Module

Yokogawa EC401-10 S2 CENTUM VP Bus Coupler Module

Disponibilidad: 20 Quedan en stock

Yokogawa EC401-10 S2 Bus Coupler Module The Yokogawa EC401-10 S2, also cataloged as the EC401 Bus Coupler Module, operates as...

Código: EC401-10-S2

Manufacturer: Yokogawa
Product No.: EC401-10-S2
Product Type: Bus Coupler Modules
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 250g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Yokogawa EC401-10 S2 Bus Coupler Module

The Yokogawa EC401-10 S2, also cataloged as the EC401 Bus Coupler Module, operates as a dedicated hardware component for signal interconnectivity and bus expansion within Yokogawa CENTUM VP and FIO control system racks. Mounting directly onto the node chassis, the module interfaces internal backplane logic with external I/O extension buses, handling 40-channel signal routing through secure terminal interfaces. The unit provides physical termination and signal coupling across distributed field control nodes while suppressing noise propagation across high-density I/O subsystems.

Suffix Breakdown & Model Matrix

Suffix Code	Specification	Functional Description
EC401	Base Model	Bus Coupler / Terminal Interface Module
-10	Functional Option	Standard 40-channel bus coupling configuration
S2	Style Revision	Style S2 hardware layout and component update

Hardware Specifications

Parameter	Specification
Model	EC401-10 S2
Brand	Yokogawa
Origin	Indonesia
Weight	0.25 kg net (0.55 lbs / 1.2 kg shipping weight)
Dimensions	130 mm W x 30 mm H x 100 mm D
Operating Temp	-20 to +60 deg C
Power Consumption	Passive bus backplane coupling power
Channel Capacity	40 channels
Insulation Resistance	100 Mohm minimum at 500 VDC
Withstand Voltage	500 VAC dielectric isolation for 1 minute
Terminal Type	Screw-type (M3/M4) connection block
Mounting Profile	Rack or panel mounting profile

4-20 mA HART Loop Protocol & Channel-to-Channel Isolation Integration

The EC401-10 S2 bus coupler maintains internal dielectric isolation barriers rated at 500 VAC to safeguard low-voltage backplane data buses from field-side electrical interference. When routing mixed signal channels carrying 4-20 mA HART loop protocol carrier frequencies or millivolt CJC (cold junction compensation) reference signals, the module prevents ground loop formation across adjacent nodes. Built-in physical isolation barriers minimize cross-talk between high-density digital lines and sensitive analog measurement loops across the entire 40-channel interface.

Frequently Asked Questions

Q: How does the EC401-10 S2 module maintain signal integrity across long backplane cable runs?

A: The module incorporates industrial-grade insulation and dedicated shield grounding plane interfaces, preventing high-frequency common-mode noise and ground potential differences from corrupting digital and analog bus signals.

Q: Can the screw-terminal assembly be serviced or replaced without dismounting the host rack?

A: Yes. Field wiring connects directly to the modular terminal interface, allowing technicians to disconnect field lines during maintenance without unseating the internal bus coupler board from the chassis rail.

Q: Is external DC power required to operate the EC401-10 S2 module?

A: No. The bus coupler draws its operational logic power directly from the internal FIO system backplane bus.

Field Installation Guidelines

Terminal Screw Torque: Tighten all M3/M4 screw terminals to a maximum torque of 0.5 to 0.6 Nm to ensure gas-tight electrical contact without stripping connector threads.
Shield Grounding Connection: Terminate all overall field cable shields directly to the cabinet functional earth (FE) bus bar using short, low-impedance grounding straps.
Signal Cable Segregation: Separate 4-20 mA analog wiring and low-voltage digital signal cables connected to the module from high-voltage AC power lines by a minimum distance of 200 mm.
Cabinet Environment Controls: Maintain ambient enclosure temperatures between -20 and +60 deg C with relative humidity below 95% (non-condensing) to avoid condensation on terminal surfaces.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.