HIMA 22100 Planar4 Safety Series Datasheet & Technical Manual

Disponibilidad: 99 Quedan en stock

HIMA 22100 Planar4 Safety Series Configured for discrete signal capturing in Safety Instrumented Systems (SIS), the HIMA 22100 (22100 Digital...

Código: 22100

Manufacturer: HIMA
Product No.: 22100
Product Type: Digital I/O Cards
Product Origin: Germany
Payment:T/T, Western Union
Weight: 350g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

HIMA 22100 Planar4 Safety Series

Configured for discrete signal capturing in Safety Instrumented Systems (SIS), the HIMA 22100 (22100 Digital Input Module) provides direct physical/electrical execution.

Hardware Specifications

Parameter	Specification
Model	22100 (also cataloged as 22 100)
Brand	HIMA
Origin	Germany
Weight	0.35 kg
Dimensions	72 x 144 x 100 mm
Operating Temp	-20 to +60 deg C
Power Consumption	24 VDC nominal
Input Channels	32 digital inputs
Signal Voltage Range	24 VDC nominal
Input Type	Potential-free, isolated
Response Time	<=10 ms
Diagnostics	Built-in self-test, short-circuit and open-circuit detection
Isolation	1500 V RMS channel-to-ground
Safety Certification	SIL 3 (IEC 61508), PLe (EN ISO 13849-1)
Storage Temp	-40 to +85 deg C
Humidity Tolerance	5-95% RH, non-condensing
Mounting	DIN-rail or panel mount
Protection Class	IP20
Certifications	CE, UL, TUV approved

High Reliability Safety Control (SIS)

The module architecture meets SIL 3 certification and PLe thresholds through integrated hardware diagnostic blocks that continuously verify inner logic path continuity. The internal system execution relies on a triple modular redundancy (TMR) 2oo3 architecture array to perform deterministic input validation voting loops. Continuous galvanic isolation separates the potential-free input stages from internal processing nodes, suppressing common-mode transients and ensuring deterministic fail-safe state execution within the safety loop during external field wiring faults.

Frequently Asked Questions

Q: How does the 22100 module process input state changes during a localized short-circuit condition?

A: The onboard diagnostic routines monitor loop impedance dynamically. Upon detecting an external short-circuit, the module registers a fault code on the system bus while forcing the affected channel log into its pre-configured fail-safe state.

Q: Is this hardware component rated for hot-swapping inside a live Planar4 subrack assembly?

A: Active module insertion and extraction are supported under powered backplane conditions, provided that subrack ground reference continuity is locked via the integrated retention mechanisms.

Field Installation Guidelines

Mount the module onto standard DIN-rail tracks or directly onto the structural backplane plate inside an enclosure maintaining a minimum index rating of IP54. Route all low-voltage field instrument cables through dedicated wireways, enforcing physical separation from adjacent parallel AC power lines or high-capacity motor feed circuits. Terminate the instrumentation screen layers exclusively at a single connection point on the main safety ground busbar to mitigate circulating ground loops. Maintain adequate clearance envelopes above and below the IP20 chassis to facilitate non-restricted vertical thermal dissipation.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.