ANB10D-223 S2 Yokogawa ESB Bus Controller

ANB10D-223 S2 Yokogawa ESB Bus Controller | New & Original Stock

Availability: 99 left in stock

Yokogawa ANB10D-223 S2 CENTUM VP/CS 3000 ESB Bus Unit Configured for high-speed data transmission in CENTUM VP / CS 3000...

SKU: ANB10D-223 S2

Manufacturer: Yokogawa
Product No.: ANB10D-223 S2
Product Type: Bus Controller Modules
Product Origin: 日本
Payment:T/T, Western Union
Weight: 1500g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Yokogawa ANB10D-223 S2 CENTUM VP/CS 3000 ESB Bus Unit

Configured for high-speed data transmission in CENTUM VP / CS 3000 platforms, the Yokogawa ANB10D-223 S2 (ANB10D-223 S2 Dual Node ESB Bus Unit) provides direct physical/electrical execution. It functions as the primary communication routing bridge linking a central Field Control Unit (FCU) to decentralized downstream I/O modules across a deterministic network backplane.

Hardware Specifications

Parameter	Specification
Model	ANB10D-223 S2
Brand	Yokogawa
Origin	Japan
Weight	1.5 kg (Base chassis without I/O modules)
Dimensions	482.6 mm x 221.5 mm x 205 mm
Operating Temp	0 to +60 deg C
Power Consumption	6 W or less (Base logic consumption)
Input Voltage	Dual 24 VDC inputs (Redundancy supported)
Bus Interface	ESB (Extended Serial Bus)
Transmission Speed	10 Mbps (Deterministic)
Node Configuration	Dual Node architecture
Slot Capacity	Accommodates 8 to 10 I/O modules depending on specific chassis configuration
Mounting	Standard 19-inch rack mount or direct panel installation

4-20 mA HART Loop Protocol & Channel Isolation

This bus unit coordinates the transmission of multi-channel data packets, including digitized 4-20 mA HART loop protocol parameters, across the 10 Mbps backplane. The physical architecture establishes galvanic channel-to-channel isolation parameters between adjacent slot locations. This isolation blocks common-mode voltage fluctuations and ground potential differences from altering raw field sensor inputs, preserving communication packet sequence timing under heavy EMI loads.

Frequently Asked Questions

Q: How does the dual-redundant configuration handle an independent bus interface failure?

A: The dual node structure operates parallel communication pathways simultaneously over the ESB bus. If one interface line encounters an electrical fault or physical break, data transmission switches immediately to the healthy path within sub-10ms cycle boundaries, preventing process loop disruptions.

Q: Can the 24 VDC inputs operate from separate power grid sources?

A: Yes. The dual 24 VDC terminals are physically isolated inside the base logic assembly. Connecting them to independent power supplies or battery banks provides real-time system supply redundancy.

Field Installation Guidelines

Install the assembly into a standard 19-inch structural rack or flat vertical panel space using the specified manufacturer mounting screws to check mechanical deflection.
Maintain clear vertical spacing above and below the card cage assembly to permit unimpeded convective airflow and hold temperatures within the 0 to +60 deg C operational threshold.
Route the high-frequency ESB bus interface cables away from high-current AC supply lines to minimize data transmission frame losses.
Terminate all system chassis earth connections directly to a low-resistance plant instrumentation ground bus to maintain signal reference integrity.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.