The Foxboro RH924YL, also cataloged as the RH924YL Baseplate, serves as the primary RH924YL Horizontal Baseplate utilized to execute physical mounting and electrical interconnect execution across Foxboro I/A Series and Foxboro Evo platforms.
| Parameter | Specification |
|---|---|
| Model | RH924YL |
| Brand | Foxboro (Schneider Electric) |
| Origin | USA |
| Weight | 3.0 kg |
| Dimensions | Horizontal-Mount Form Factor (Supports Dual Processor Slots) |
| Operating Temp | 0 deg C to +60 deg C |
| Power Consumption | Max ~8.5 W (Supports Redundant 24 VDC Supply Inputs) |
| Mounting Orientation | Horizontal-Mounted |
| Supported Processors | Single or Redundant FCP280 Control Processors |
| Memory Support | Supports FCP280 16 MB SDRAM / 32 MB Flash |
The RH924YL horizontal baseplate distributes dual 24 VDC field power through internal power buses while preserving channel-to-channel isolation across high-speed data acquisition paths. Optimized for deterministic 4-20 mA HART loop protocol translation, the low-latency backplane traces manage continuous high-traffic data exchanges between FCP280 processors and Fieldbus Modules (FBMs). This galvanically isolated architecture eliminates cross-channel noise propagation and ground loop potential across mission-critical control loops.
Q: How does the horizontal mounting orientation of the RH924YL impact cabinet thermal performance?
A: The horizontal-mounting layout optimizes vertical convective airflow across the passive heatsinks of seated FCP280 processors, preventing localized thermal buildup inside shallow-depth enclosure designs.
Q: Does replacing a faulty FCP280 processor on the RH924YL baseplate require powering down the entire cabinet backplane?
A: No. The baseplate architecture supports live hot-swapping of individual FCP280 processor units without interrupting 24 VDC power distribution or disturbing neighboring field bus communication cabling.
Position the RH924YL baseplate horizontally within the enclosure rack to ensure unimpeded vertical convection airflow through the thermal dissipation pathways. Fasten all primary mounting hardware to the cabinet frame to establish a rigid mechanical ground connection. Terminate dual 24 VDC redundant power feeds into the designated power terminals, ensuring correct polarity and wire gauge. Fasten all communication cable shields directly to the panel earth bus bar to maintain electromagnetic immunity.
Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.
Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.
We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.