Honeywell C300 8C-IP0101 Controller IOTA Base

Honeywell C300 8C-IP0101 Controller IOTA Base | New & Original Stock

Availability: 99 left in stock

Honeywell 8C-IP0101 Experion PKS Series 8 The Honeywell 8C-IP0101, also cataloged as the 51454362-175 Standard I/O Termination Assembly (IOTA), operates...

SKU: 8C-IP0101 51454362-175

Manufacturer: Honeywell
Product No.: 8C-IP0101 51454362-175
Product Type: I/O Termination Assemblies
Product Origin: USA
Payment:T/T, Western Union
Weight: 650g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Honeywell 8C-IP0101 Experion PKS Series 8

The Honeywell 8C-IP0101, also cataloged as the 51454362-175 Standard I/O Termination Assembly (IOTA), operates as a dedicated hardware component for physical field wiring termination within Experion PKS Series 8 C300 platforms.

Hardware Specifications

Parameter	Specification
Model	8C-IP0101
Brand	Honeywell
Origin	United States
Weight	0.65 kg
Dimensions	150 mm x 80 mm x 35 mm
Operating Temp	-40 to +70 deg C
Power Consumption	Passive distribution via backplane connections
Device Type	Standard I/O Termination Assembly (IOTA)
System Platform	Experion PKS Series 8 C300
I/O Capacity	Supports single (non-redundant) I/O modules
Mounting	Vertical DIN-Rail mounting
Wiring Interface	Fixed screw-terminal blocks

Process Control and DCS Instrumentation

The termination assembly forms the physical wiring layer interfaces required to route field device lines into the processing electronics of the C300 controller. Galvanic channel-to-channel isolation parameters are dictated by the specific electronic I/O module hosted on the base card. The 8C-IP0101 structure utilizes a vertical mechanical layout with fixed screw-terminal blocks to manage signal distribution, auxiliary loop power tracking, and instrumentation shielding connections, preventing noise coupling across low-voltage 4-20 mA HART loop protocol lines.

Frequently Asked Questions

Q: Does the 8C-IP0101 hardware assembly support redundant I/O module configurations? A: No, the 8C-IP0101 is a non-redundant base plate engineered exclusively to interface with a single, simplex Series 8 I/O electronic module. Redundant topologies require distinct dual-slot termination assemblies.

Q: What environmental protections are applied to the copper circuit paths of this unit? A: The printed circuit board elements are treated with an industrial conformal coating option, providing hardware resistance against moisture, dust, and gaseous contaminants specified under Class G3 harsh environment profiles.

Q: Is external line voltage wired directly into this termination base plate? A: No, the 8C-IP0101 distributes operating power and bus voltages derived directly from the integrated Honeywell power system distribution lines via the backplane carrier connection paths.

Field Installation Guidelines

DIN-Rail Seating and Alignment: Mount the assembly vertically onto standard 35 mm DIN rails inside the enclosure. Secure the integral locking tabs to avoid lateral sliding or mechanical displacement from vibration.
Terminal Wire Termination Torque: Secure all field conductors into the fixed screw-terminal blocks using an appropriate precision screwdriver. Adhere to specified torque limits to avoid stripping threads while maintaining low-impedance electrical contact.
Cable Shield Routing Rules: Terminate individual instrument drain shields at the designated grounding busbar pins on the assembly card. Do not ground the shields at the field instrument enclosure to eliminate potential ground loop currents.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.