F60DIO24/1601 HIMA Digital I/O Module

Safety PLC Digital I/O Module | HIMA F60DIO24/1601 HIMatrix

Safety PLC Digital I/O Module | HIMA F60DIO24/1601 HIMatrix

Availability: 99 left in stock

HIMA F60DIO24/1601 HIMatrix Safety I/O Module Configured for discrete signal processing in HIMatrix safety platforms, the HIMA F60DIO24/1601 (F60DIO24/1601 Digital...

SKU: F60DIO24/1601

Manufacturer: HIMA
Product No.: F60DIO24/1601
Product Type: Digital I/O Cards
Product Origin: Germany
Payment:T/T, Western Union
Weight: 400g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

HIMA F60DIO24/1601 HIMatrix Safety I/O Module

Configured for discrete signal processing in HIMatrix safety platforms, the HIMA F60DIO24/1601 (F60DIO24/1601 Digital I/O Module) provides direct physical/electrical execution across safety-instrumented loops.

Hardware Specifications

Parameter	Specification
Model	F60DIO24/1601
Brand	HIMA
Origin	Germany
Weight	0.26 kg (0.4 kg shipping)
Dimensions	51 x 203 x 152 mm (6 RU, 4 HP form factor)
Operating Temp	0 to +60 deg C
Power Consumption	24 VDC (-15%...+20%, 380 mA) / 3.3 VDC (150 mA)
Digital Inputs	24 channels (galvanically isolated, High: 10 to 30 VDC, Low: max 5 VDC)
Digital Outputs	16 channels (galvanically isolated, 18.4 to 26.8 VDC, max 2 A per channel, max 8 A per module)
Safety Certification	IEC 61508 SIL3, TÜV certified
Diagnostics	Line monitoring, short-circuit detection, overload protection
Mounting Type	Subrack slot / rack mounting

SIL3 Certification & Fail-Safe State Execution

The HIMA F60DIO24/1601 incorporates complete galvanic isolation between individual channel loops and internal processing circuits to mitigate ground loops and high-frequency electrical noise. Built in full compliance with IEC 61508 SIL3 safety specifications, the module continuously monitors system status and channel performance via internal diagnostic routines.

Integrated diagnostic logic evaluates field circuit continuity, voltage deviations, and short-circuit conditions in real time. Upon detection of a field wiring failure or internal diagnostic fault, the unit isolates the affected circuit and executes a deterministic fail-safe shutdown state. This action protects connected field actuators and central logic hardware without disrupting healthy parallel loops across the HIMatrix backplane.

Frequently Asked Questions

Q: How does the module react when an individual output channel experiences a short circuit?

A: Internal diagnostic circuitry detects overcurrent conditions, flags a diagnostic alarm across the backplane, and immediately drives the affected channel driver into a fail-safe de-energized state.

Q: Are field-side power inputs galvanically isolated from the internal 3.3 VDC backplane logic?

A: Yes. Optocouplers and physical isolation barriers completely decouple 24 VDC field signal lines from internal logic circuits, protecting processing hardware against external voltage surges.

Q: What are the current distribution limitations when driving multiple 24 VDC field outputs simultaneously?

A: Individual channels support up to 2 A switching current, but total simultaneous output loading across the entire module must not exceed 8 A to maintain thermal equilibrium.

Field Installation Guidelines

Insert the module into a 6 RU subrack slot, securing mechanical retention fasteners to verify grounded contact with the subrack frame. Maintain a minimum vertical clearance of 50 mm above and below the assembly to facilitate natural convection cooling across the 0 to +60 deg C operating temperature spectrum.

Route 24 VDC discrete signal wiring through dedicated wire ducts separated from AC power lines and drive output leads. Terminate field cable shields directly to a central earthing bar. Verify terminal connections and check that power supply voltages meet IEC 61131-2 isolation limits prior to system commissioning.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.