SCP461-51 S1 Yokogawa Sequence Control Card

Sequence Control Processor Card | Yokogawa SCP461-51 S1

Sequence Control Processor Card | Yokogawa SCP461-51 S1

Availability: 99 left in stock

Yokogawa SCP461-51 S1 CENTUM VP Sequence Control Processor Card The Yokogawa SCP461-51 S1, also cataloged as the SCP461-51 Sequence Control...

SKU: SCP461-51 S1

Manufacturer: Yokogawa
Product No.: SCP461-51 S1
Product Type: Sequence Control Processors
Product Origin: 日本
Payment:T/T, Western Union
Weight: 700g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Yokogawa SCP461-51 S1 CENTUM VP Sequence Control Processor Card

The Yokogawa SCP461-51 S1, also cataloged as the SCP461-51 Sequence Control Processor Card, operates as a dedicated hardware component for discrete state transitions, sequential logic execution, and protective interlocks within Yokogawa CENTUM VP systems.

Hardware Specifications

Parameter	Specification
Model	SCP461-51 S1
Brand	Yokogawa
Origin	Japan
Weight	0.7 kg
Dimensions	200 mm x 150 mm x 25 mm
Operating Temp	0 to 60 deg C
Power Consumption	12 to 18 W (at 24 VDC backplane bus)
System Series	CENTUM CS 3000 / CENTUM VP
Hardware Style	S1
Function	Discrete Logic, Interlocking, and Batch Sequence Execution
Redundancy	Dual-Redundant (Duplex) configuration support
Network Interface	Vnet/IP real-time bus interface
Storage Temp	-40 to +85 deg C

Process Control and DCS Interface Protocols

The SCP461-51 S1 sequence controller communicates across Vnet/IP real-time network backplane lines to manage discrete logic states and interlocks. Internal system isolation barriers and data routing preserve signal stability while interfacing with 4-20 mA HART loop protocol field devices, supporting automated cold junction compensation (CJC) and continuous channel-to-channel isolation during batch sequence steps.

Frequently Asked Questions

Q: How does the duplex redundant configuration prevent sequence interruption on the SCP461-51 S1?

A: In a 1:1 dual-redundant arrangement, the primary and standby SCP461-51 S1 cards continuously synchronize sequence steps, timers, and internal process registers over the Vnet/IP bus interface. A detected processor error prompts an immediate bumpless transfer without resetting process timers or altering active state conditions.

Q: Can an SCP461-51 S1 card be hot-swapped while the Field Control Station is running?

A: Yes. When configured in a dual-redundant pair, the faulty unit can be unseated and extracted from the backplane under active power without disrupting real-time logic execution or network communication on the active control module.

Field Installation Guidelines

Mount the Field Control Station rack securely and connect protective grounding conductors before seating the SCP461-51 S1 module. Insert the card smoothly along the chassis guide rails until the backplane bus interface latches seat fully. Maintain clear vertical airflow above and below the rack assembly to manage thermal dissipation. Ensure signal cables and network connections adhere to Yokogawa shield grounding standards to eliminate electrical noise and cross-talk across high-speed Vnet/IP data lines.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.