CP471-01 S1 Yokogawa Processor Module

Yokogawa CP471-01 S1 CENTUM VP Processor Module

Yokogawa CP471-01 S1 CENTUM VP Processor Module

Availability: 20 left in stock

Yokogawa CP471-01 S1 Processor Module Configured for real-time process control and high-speed data acquisition in Yokogawa CENTUM VP Distributed Control...

SKU: CP471-01 S1

Manufacturer: Yokogawa
Product No.: CP471-01 S1
Product Type: CPU Processors
Product Origin: JAPAN
Payment:T/T, Western Union
Weight: 350g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Yokogawa CP471-01 S1 Processor Module

Configured for real-time process control and high-speed data acquisition in Yokogawa CENTUM VP Distributed Control System (DCS) platforms, the Yokogawa CP471-01 S1 (CP471-01 Processor Module) provides direct physical/electrical execution. This 32-bit RISC processor module serves as the primary control execution engine within AFV30S/D and AFV40S/D Field Control Units (FCUs). It processes complex control algorithms with a deterministic execution cycle time of less than or equal to 100 ms while routing control parameters and I/O data across ESB/ER bus interfaces and Vnet/IP plant networks.

Suffix Breakdown & Model Matrix

The part number and style code configuration defines the environmental and hardware features of the processor module:

CP471-01: Base processor module designation for CENTUM VP Field Control Units.
Style Code S1: Enhanced reliability variant featuring ISA G3 conformal coating for harsh ambient environments.

Hardware Specifications

Parameter	Specification
Model	CP471-01 S1
Brand	Yokogawa
Origin	Japan
Weight	0.35 kg
Dimensions	120 mm x 25 mm x 130 mm
Operating Temp	0 to +55 deg C
Power Consumption	15 W maximum (5 VDC, ~1.5 A via backplane)
Processor Architecture	32-bit RISC processor
Memory Capacity	64 MB program memory, 128 MB data memory with ECC
Redundancy	Dual-redundant (Hot-standby) supported
Communication Protocols	Vnet/IP for system network, ESB/ER bus for I/O modules
Cycle Time	Deterministic cycle time <= 100 ms
Isolation Voltage	1500 VAC for 1 minute
Environmental Rating	ISA Standard G3 compliant

Process Control Loops and Fieldbus Integration

The CP471-01 S1 processor module manages multi-loop process parameters by interfacing directly with field instrumentation via analog and digital I/O subnets. The module maintains continuous communication over 4-20 mA HART loop protocol connections and FOUNDATION Fieldbus / Profibus PA networks, facilitating real-time field device configuration and diagnostic extraction. Internal signal conditioning utilizes galvanic isolation and channel-to-channel isolation across input pathways to suppress electrical noise. For thermal sensing loops, the unit processes raw thermocouple signals while applying cold junction compensation (CJC) algorithms to ensure precision control execution across plant operations.

Frequently Asked Questions

Q: How does the dual-redundant hot-standby mechanism operate when two CP471-01 S1 modules are installed in an FCU?

A: The primary CPU executes control logic while mirroring its memory state to the secondary standby CPU over a high-speed bus; upon detecting a hardware fault, execution switches to the standby unit within one control cycle without process bump.

Q: What action should technicians take regarding memory protection during power cycles?

A: The CP471-01 S1 incorporates ECC (Error-Correcting Code) memory to correct single-bit memory errors automatically, eliminating manual memory resetting or battery backup requirements for volatile storage integrity.

Q: Is the CP471-01 S1 backward compatible with earlier CENTUM VP software revisions?

A: The module requires CENTUM VP System Software Revision R6.01 or later for full hardware recognition and execution of its enhanced instruction set.

Field Installation Guidelines

When installing or replacing the Yokogawa CP471-01 S1 module in a Field Control Unit, follow these installation procedures:

De-energize the rack or follow authorized hot-swap procedures for redundant CPU configurations before inserting the module into the FCU slot.
Align the module circuit board with the upper and lower card guides of the assigned CPU slot inside the FCU chassis.
Push the module firmly inward until the backplane multi-pin connectors seat completely into the backplane socket.
Fasten the top and bottom retaining screws to 0.5 N m torque to secure electrical grounding and mechanical mounting.
Connect the Vnet/IP network cables to the corresponding bus ports on the CPU front interface panel and verify that the green status LEDs illuminate properly upon power-up.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.