IC200ALG262 GE Fanuc Analog Input Module

GE Fanuc IC200ALG262 VersaMax Analog Input Module

GE Fanuc IC200ALG262 VersaMax Analog Input Module

Disponibilidad: 10 Quedan en stock

Configured for high-resolution single-ended analog current signal processing in VersaMax I/O architectures, the GE Fanuc IC200ALG262 (IC200ALG262 Analog Input Module)...

Código: IC200ALG262

Manufacturer: GE Fanuc
Product No.: IC200ALG262
Product Type: Analog Input Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 110g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Configured for high-resolution single-ended analog current signal processing in VersaMax I/O architectures, the GE Fanuc IC200ALG262 (IC200ALG262 Analog Input Module) provides direct physical/electrical execution. The module converts 0-20 mA or 4-20 mA current loops across 8 single-ended input channels arranged in a single group, delivering digitized values directly to the central processing unit or network interface unit over the backplane bus.

Hardware Specifications

Parameter	Specification
Model	IC200ALG262
Brand	GE Fanuc
Origin	USA
Weight	0.25 lbs (0.11 kg)
Dimensions	Single-slot VersaMax module footprint
Operating Temp	0 deg C to 60 deg C
Power Consumption	200 mA maximum at 5 VDC from PLC backplane
Input Channels	8 channels (single-ended, 1 group)
Converter Resolution	15 bits
Input Signal Ranges	0-20 mA, 4-20 mA
Digital Resolution	0.5 uA for 4-20 mA; 0.625 uA for 0-20 mA
Input Impedance	100 Ohms
Update Rate	7.5 ms
Common Mode Range	-10 V to +10 V
Common Mode Rejection	70 dB
Diagnostic Functions	Loss of internal user power, open wire detection (4-20 mA mode)

Backplane Bus Communication Velocity & Firmware Flash Compatibility

The module executes backplane data transfers at deterministically scheduled scan cycles, updating all 8 analog channel values every 7.5 ms across the 5 VDC VersaMax system bus. Integrated Analog-to-Digital Converter (ADC) logic guarantees a constant 15-bit digital resolution across both 0-20 mA and 4-20 mA operating modes without processing overhead. Full backplane communication and configuration execution requires compatibility with VersaPro software Version 2.0 or higher, VersaMax PLC CPU Firmware 2.10 or higher, or Ethernet Network Interface Unit (NIU) firmware Version 1.10 or higher. Range selection relies on hardware jumpers: operating without a terminal jumper sets the default 4-20 mA range, whereas installing the jumper selects the 0-20 mA range.

Frequently Asked Questions

Q: What are the firmware requirements for operating the IC200ALG262 with a VersaMax CPU or NIU?

A: The module requires VersaMax PLC CPU Firmware Version 2.10 or higher, or VersaMax Ethernet NIU Firmware Version 1.10 or higher, used alongside VersaPro software Version 2.0 or higher.

Q: How is open wire fault detection handled across the input ranges?

A: Open wire fault detection is active exclusively when the module is operating in the 4-20 mA range mode; loss of internal power diagnostics remains active across all modes.

Q: What is the maximum current drawn by the module from the backplane?

A: The module draws a maximum current of 200 mA from the internal 5 VDC system backplane power supply.

Field Installation Guidelines

Snap the module securely onto the VersaMax I/O backplane carrier or DIN rail assembly before applying system power.
Ensure terminal jumpers are installed or removed on the wiring base prior to field wiring according to the desired loop range (uninstalled for 4-20 mA, installed for 0-20 mA).
Connect 8 single-ended field current loops using shielded twisted-pair cables to mitigate common-mode noise and external electromagnetic interference.
Connect cable shields to ground at the signal source end, or ground at the module base if source grounding is unavailable.
Verify that the module OK LED illuminates green upon power-up to confirm valid backplane initialization and successful configuration loading.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.