IC200ALG320 GE Fanuc Analog Output Module

GE Fanuc IC200ALG320 VersaMax Analog Output Module

GE Fanuc IC200ALG320 VersaMax Analog Output Module

Disponibilidad: 10 Quedan en stock

The GE Fanuc IC200ALG320, also cataloged as the IC200ALG320 Analog Output Module, operates as a dedicated hardware component for multi-channel...

Código: IC200ALG320

Manufacturer: GE Fanuc
Product No.: IC200ALG320
Product Type: Analog Output Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 280g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The GE Fanuc IC200ALG320, also cataloged as the IC200ALG320 Analog Output Module, operates as a dedicated hardware component for multi-channel analog current signal generation within VersaMax I/O platforms. The unit executes digital-to-analog signal conversion across 4 current-sourcing channels, delivering 4-20 mA control signals to field actuators and positioning devices.

Hardware Specifications

Parameter	Specification
Model	IC200ALG320
Brand	GE Fanuc
Origin	USA
Weight	0.63 lbs (0.28 kg)
Dimensions	Single-slot VersaMax module footprint
Operating Temp	0 deg C to 60 deg C
Power Consumption	50 mA max from backplane; 240 mA max external current consumption
Number of Outputs	4 analog current-sourcing outputs
Output Signal Range	4-20 mA
Analog Resolution	12 bits (4 uA)
Measurement Accuracy	0.3% typical, +/-1% maximum full scale
Update Rate	0.3 ms maximum
External Power Voltage	18 to 30 VDC or 9.6 to 15 VDC
Diagnostic Functions	Loss of user side power detection
Status Indicators	2 LEDs (FLD PWR and OK)

Backplane Bus Communication Velocity & Firmware Flash Compatibility

The module interfaced through the VersaMax backplane structure operates with a maximum update rate of 0.3 ms, processing 12-bit output directives sent from the CPU or network interface unit. Output channel logic draws up to 50 mA from the internal 5 VDC system bus while utilizing external 12/24 VDC user side power for field-loop actuation. Upon fault detection or loss of backplane communication, the hardware executes configurable fail-safe states, reverting channels to 4 mA or holding the last valid output state via jumper selection.

Frequently Asked Questions

Q: Does the IC200ALG320 require an external power supply to operate field output loops?

A: Yes, while logic power is derived from the 5 VDC backplane bus (50 mA max), the analog output channels require external field power rated at 18 to 30 VDC or 9.6 to 15 VDC.

Q: What fail-safe output response modes are available upon CPU stoppage or fault?

A: The module can be configured via jumper settings to either hold the last known output state or drop the output signal to 4 mA.

Q: How does the module indicate operating status and field power presence?

A: The module contains 2 onboard LED indicators: the OK LED confirms backplane power supply and system initialization, while the FLD PWR LED confirms active user side field power.

Field Installation Guidelines

Snap the module securely onto the VersaMax I/O rail carrier prior to attaching field termination blocks.
Confirm that backplane logic power is de-energized before inserting or removing the output module.
Wire the external 18-30 VDC loop power supply and 4-20 mA field actuators using shielded twisted-pair cables.
Ground cable shields at a single ground point on the enclosure grounding bar to suppress noise and prevent ground loops.
Verify output response behavior configurations (Hold Last State vs. 4 mA default) via hardware jumper placement before commissioning.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.