- +8618030270289
- Ubicación de la tienda
Configured for PROFINET network node interfacing in PACSystems RX3i platforms, the GE Fanuc IC695CEP001 (IC695CEP001 Compact Expansion Carrier) provides direct physical/electrical execution.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC695CEP001 |
| Brand | GE Fanuc Emerson |
| Origin | United States |
| Weight | 1.38 lbs (0.62 kg) |
| Dimensions | 177.2 x 51 x 35 mm (7 x 2 x 1.3 in) |
| Operating Temp | 0 to 60 deg C (32 to 140 deg F) |
| Power Consumption | 5.25 W (0.22 A) at 24 VDC nominal (Input Range: 19.2 to 30 VDC) |
| Network Interface | Dual RJ-45 copper 10/100 Base-TX Ethernet ports |
| PROFINET Version | PROFINET Version 2.3 (Class A) |
| USB Interface | 1 Micro-B USB 2.0 compliant port |
| I/O Capacity per Station | 1 I/O module per station; 1024 bytes total I/O (512 bytes input / 512 bytes output) |
| Control/Status Bits | 32 input status bits / 32 output control bits |
| Programming Software | Proficy Machine Edition 8.0 SIM 5 or later |
Profinet Deterministic Networks and Firmware Flash Compatibility
The IC695CEP001 integrates into Profinet deterministic networks to manage high-speed remote node scanning across ring, star, and line topologies. Featuring a built-in Micro-B USB 2.0 port, the carrier maintains complete firmware flash compatibility for local operating system upgrades without removing the module from field wiring. Dual RJ-45 copper Ethernet ports support 10/100 Mbps auto-sensing data routing, ensuring deterministic packet transport, I/O density scaling, and real-time synchronization between the central CPU and attached I/O drop hardware.
Frequently Asked Questions
Q: What software version is required to configure the IC695CEP001 carrier module?
A: The IC695CEP001 requires Proficy Machine Edition version 8.0 SIM 5 or later for system configuration, parameterization, and network setup.
Q: How many I/O modules can be mounted to a single IC695CEP001 CEP carrier station?
A: Each IC695CEP001 carrier station supports exactly 1 RX3i I/O module, handling up to 512 bytes of input data and 512 bytes of output data.
Q: What is the purpose of the onboard Micro-B USB port on the IC695CEP001?
A: The USB 2.0 Micro-B connector is dedicated to performing local maintenance tasks and updating module firmware.
Field Installation Guidelines
- Disconnect main line power supplying the 24 VDC field power bus before mounting or wiring the IC695CEP001 carrier.
- Secure the IC695CEP001 carrier to the mounting surface or DIN rail according to standard panel mechanical practices.
- Connect 24 VDC power conductors (19.2 to 30 VDC operating range) to the module power input terminals, maintaining correct wire polarity.
- Plug CAT5e or CAT6 industrial shielded Ethernet cables into the RJ-45 receptacles, verifying that cable drain wires are grounded to suppress noise.
- Install the designated RX3i I/O module into the carrier slot, applying power and confirming LED diagnostic indicators for active network status.
¿Qué dicen nuestros clientes sobre nosotros?
¡Excelente soporte de emergencia!
Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.
Mark Thompson
Gerente de Mantenimiento, EE. UU.Fuente confiable de repuestos nuevos
Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.
Robert Hoffmann
Jefe de ingeniería, AlemaniaServicio y calidad de primer nivel
Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.
Lucas Müller
Director de Operaciones, AlemaniaProductos relacionados
Translation missing: es.general.search.loading