IC200MDD842 GE Fanuc Discrete Mixed I/O Module Datasheet & Technical Manual

IC200MDD842 GE Fanuc VersaMax Discrete Mixed I/O Module

IC200MDD842 GE Fanuc VersaMax Discrete Mixed I/O Module

Disponibilidad: 10 Quedan en stock

Configured for discrete signal processing and output actuation in VersaMax PLC architectures, the GE Fanuc IC200MDD842 (IC200MDD842 Discrete Mixed I/O...

Código: IC200MDD842

Manufacturer: GE Fanuc
Product No.: IC200MDD842
Product Type: Discrete Mixed I/O Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 140g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Configured for discrete signal processing and output actuation in VersaMax PLC architectures, the GE Fanuc IC200MDD842 (IC200MDD842 Discrete Mixed I/O Module) provides direct physical/electrical execution. The module manages 32 total field points organized into 16 discrete inputs and 16 discrete outputs, processing positive and negative field logic while enforcing overcurrent protection across load paths.

Hardware Specifications

Parameter	Specification
Model	IC200MDD842
Brand	GE Fanuc
Origin	USA / Standard Industrial Operations
Product Type	Discrete Mixed I/O Modules
Total I/O Points	32 (16 Inputs, 16 Outputs)
Input Configuration	2 groups of 8 points (Positive / Negative logic)
Output Configuration	1 group of 16 points (Electronic Short Circuit Protection)
Nominal Operating Voltage	24 VDC
Load Current	0.5 A per point at 30 VDC
Response Time	0.5 ms (Input and Output channels)
Hardware Upgrade Requirement	Revision IC200MDD842B required for negative logic operation
Channel Isolation	Non-isolated channels
Internal Protection	Electronic overcurrent, free-wheeling diodes, short circuit protection
Status Indication	Per-point LED indicators (Green/Amber states)
Dimensions	Standard VersaMax module footprint
Weight	0.14 kg (0.31 lbs)
Operating Temp	0 to +60 deg C
Power Consumption	Standard 24 VDC backplane bus draw

Backplane Bus Communication Velocity and Deterministic Networks

The module coordinates real-time state updates across the backplane bus to synchronize I/O scanning routines with controller execution frames. High-density I/O point grouping maintains backplane bus communication velocity across EtherNet/IP and Profinet deterministic networks without introducing scan latencies. Dedicated hardware registers verify firmware flash compatibility during controller startup to prevent communication mismatches across mixed I/O racks.

Frequently Asked Questions

Q: What hardware revision is required to enable negative logic operation on the IC200MDD842?

A: Negative logic input processing requires the IC200MDD842B hardware revision upgrade.

Q: Are individual channels on the IC200MDD842 galavanically isolated from one another?

A: No, channel-to-channel isolation is not supported on this module. Common power and return reference buses are shared within point groups.

Q: How does the module react to output overload and short-circuit conditions?

A: Integrated electronic overcurrent protection and free-wheeling diodes trip the affected channel and report diagnostic fault messages to the controller while illumination state changes on the local status LEDs.

Field Installation Guidelines

Field Wiring Power Isolation: Turn off external 24 VDC field supply voltages before inserting or removing terminal blocks to prevent arc discharge across input/output terminals.
Inductive Load Shielding: Ensure freewheeling diode protection circuits remain functional when driving inductive DC loads to clamp voltage spikes across switching elements.
Terminal Grouping and Common Wiring: Wire positive or negative logic field inputs to the correct common return group terminal, ensuring voltage polarity matches the specific group configuration.
Conductor Separation: Separate 24 VDC discrete wiring routes from AC power cables and high-frequency drive output leads to maintain signal integrity and prevent induced field noise.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.