IC200MDL240 GE Fanuc 16-Point Input Module

IC200MDL240 GE Fanuc VersaMax Discrete Input Module

IC200MDL240 GE Fanuc VersaMax Discrete Input Module

Disponibilidad: 10 Quedan en stock

Configured for discrete AC signal processing in VersaMax control systems, the GE Fanuc IC200MDL240 (IC200MDL240 Discrete Input Module) provides direct...

Código: IC200MDL240

Manufacturer: GE Fanuc
Product No.: IC200MDL240
Product Type: Digital Input Cards
Product Origin: USA
Payment:T/T, Western Union
Weight: 170g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Configured for discrete AC signal processing in VersaMax control systems, the GE Fanuc IC200MDL240 (IC200MDL240 Discrete Input Module) provides direct physical/electrical execution. The unit accepts 16 discrete input channels operating at 120 VAC nominal voltage, converting field binary signals into 16-bit discrete data format across the backplane bus.

Hardware Specifications

Parameter	Specification
Model	IC200MDL240
Brand	GE Fanuc
Origin	USA
Weight	0.38 lbs (0.17 kg)
Dimensions	110 mm x 66.8 mm x 50.0 mm
Operating Temp	0 deg C to 60 deg C
Power Consumption	110 mA maximum backplane current at 5 VDC
Channel Count	16 discrete input points (2 groups of 8 channels)
Input Voltage Range	0-132 VAC (47-63 Hz), 120 VAC nominal
ON-State Range	70-132 VAC (7 mA minimum current)
OFF-State Range	0-40 VAC (1.5 mA maximum current)
Input Impedance	8.6 kOhms at 60 Hz
Response Time	ON: 1 cycle; OFF: 2 ms minimum
External Power	None required (logic powered from backplane)
Isolation Rating	Group-to-group: 250 VAC continuous (1500 VAC for 1 min); Optical/Frame: 1500 VAC
Status Display	16 individual channel LEDs and 1 backplane status LED

Backplane Bus Communication Velocity & Firmware Flash Compatibility

The module executes binary signal evaluation across two groups of 8 channels, interfacing directly with VersaMax CPUs or Network Interface Units (NIUs). Backplane communication velocity relies on a maximum current draw of 110 mA from the 5 VDC bus, eliminating the requirement for external field power to energize internal logic circuits. Optical isolation provides 250 VAC continuous isolation between user inputs, backplane logic, and system frame ground. Firmware flash compatibility within the host controller enables seamless I/O mapping and diagnostic status reporting via the onboard LED array.

Frequently Asked Questions

Q: Does the IC200MDL240 require an external power supply to operate field inputs?

A: No external power supply is required; internal module logic draws all operational power directly from the backplane (110 mA maximum at 5 VDC).

Q: What isolation level is provided between the individual input channels?

A: The module features group-to-group optical isolation rated at 250 VAC continuous (1500 VAC for 1 minute) between its two 8-channel groups.

Q: Does vertical DIN-rail mounting impact module performance?

A: The module supports both horizontal and vertical mounting orientations without performance derating, though input voltage thermal deratings apply at 132 VAC.

Field Installation Guidelines

Snap the carrier base onto a standard 35 mm DIN rail in either a horizontal or vertical orientation.
Insert the IC200MDL240 module firmly into the VersaMax I/O carrier until the locking mechanisms engage.
Wire incoming 120 VAC field inputs to the designated group terminals, maintaining neutral common wiring per 8-channel group.
Verify that signal wiring is separated from high-voltage DC or noisy inductive lines to prevent signal distortion.
Power up the system backplane and confirm that the backplane LED illuminates green to signal proper communication.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.