IC693MDL660 GE Fanuc Series 90-30 Discrete Input Module

Disponibilidad: 10 Quedan en stock

Configured for discrete signal sensing and field contact monitoring in Series 90-30 platforms, the GE Fanuc IC693MDL660 (IC693MDL660 Discrete Input...

Código: IC693MDL660

Manufacturer: GE Fanuc
Product No.: IC693MDL660
Product Type: Digital Input Cards
Product Origin: USA
Payment:T/T, Western Union
Weight: 450g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

Configured for discrete signal sensing and field contact monitoring in Series 90-30 platforms, the GE Fanuc IC693MDL660 (IC693MDL660 Discrete Input Module) provides direct physical/electrical execution.

Hardware Specifications

Parameter	Specification
Model	IC693MDL660
Brand	GE Fanuc Emerson
Origin	USA
Weight	1.00 lbs (0.45 kg)
Dimensions	Single-slot Series 90-30 module width
Operating Temp	0 to 60 deg C
Power Consumption	5 mA backplane current draw
Input Channels	32 discrete channels (4 isolated groups of 8 channels)
Nominal Rated Voltage	24 VDC
Input Voltage Range	0 to 30 VDC
Input Current	7.0 mA at rated voltage
On-State Voltage	15 VDC minimum
Off-State Voltage	6 VDC maximum
On-State Current	4.5 mA minimum
Off-State Current	2 mA maximum
Response Time	2 ms maximum (On and Off transitions)
Galvanic Isolation	1500 V between field side and logic side
Logic Configuration	Positive / Negative logic (sink / source)

Backplane Bus Communication Velocity & I/O Density Scaling

The IC693MDL660 module maximizes I/O density scaling by supporting 32 discrete input points across four isolated groups within a single Series 90-30 rack slot. Direct integration with the CPU baseplate ensures optimal backplane bus communication velocity, updating state data into internal memory tables with a maximum hardware response time of 2 ms. Logic circuits draw 5 mA from the internal backplane bus, while 1500 V optical isolation protects backplane logic from field-side voltage transients. Firmware flash compatibility across Series 90-30 racks maintains consistent address allocation for positive or negative logic configurations.

Frequently Asked Questions

Q: What are the backplane power supply current requirements for the IC693MDL660?

A: The module draws 5 mA of current directly from the 5 VDC backplane bus.

Q: What are the voltage thresholds for detecting On and Off logic states?

A: The module recognizes an On-state at a minimum of 15 VDC (4.5 mA) and an Off-state at a maximum of 6 VDC (2 mA maximum off-state current).

Q: How is galvanic isolation structured on this 32-point discrete module?

A: The module features 1500 V isolation between the field-side input circuits and the backplane logic side, with 32 channels grouped into 4 isolated sets of 8 channels.

Field Installation Guidelines

Power down the Series 90-30 baseplate and lock out field DC power supplies prior to module installation or servicing.
Align the IC693MDL660 housing with the chosen baseplate slot card guides and slide the unit inward until the rear backplane connector latches securely.
Fasten the top retaining screw to establish structural chassis grounding and prevent mechanical movement under operational vibration.
Wire field input devices to terminal connectors in positive (sourcing) or negative (sinking) logic configurations, adhering to the 24 VDC nominal voltage parameters.
Separate low-voltage DC input signal wiring from high-voltage AC conductors and ground all cable shields at a single enclosure point.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.