IC695PNS001 GE Fanuc RX3i PROFINET Scanner

IC695PNS001 RX3i PacSystem PROFINET Scanner Module | GE Fanuc

IC695PNS001 RX3i PacSystem PROFINET Scanner Module | GE Fanuc

Disponibilidad: 10 Quedan en stock

The GE Fanuc IC695PNS001, also cataloged as the IC695PNS001 PROFINET Scanner Module, operates as a dedicated hardware component for remote...

Código: IC695PNS001

Manufacturer: GE Fanuc
Product No.: IC695PNS001
Product Type: Industrial Communication Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 540g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The GE Fanuc IC695PNS001, also cataloged as the IC695PNS001 PROFINET Scanner Module, operates as a dedicated hardware component for remote I/O data routing and network connection management within RX3i PacSystem platforms.

Hardware Specifications

Parameter	Specification
Model	IC695PNS001
Brand	GE Fanuc Emerson
Origin	United States
Weight	0.54 kg (1.19 lbs)
Dimensions	Single slot wide module
Operating Temp	0 to 60 deg C
Storage Temp	-40 to 85 deg C
Power Consumption	1.1 A at 5 VDC, 1.2 A at 3.3 VDC
Communication Ports	4x Switched Ethernet ports (2x RJ-45, 2x SFP cages)
Serial Interface	1x Micro USB port (firmware upgrades only)
Data Rates	10/100/1000 Mbps auto-sensing
Network Topologies	Linear, Star, Daisy chain, Ring, Redundant Media
Local Parameters Storage	Integrated SD card slot for name/IP mapping transfer
Configuration Software	Proficy Machine Edition version 8.50 or later
Diagnostic Indicators	OK, LAN, STATUS, CONN, PORT, ACTIVE, USB LEDs

Profinet / EtherNet/IP Deterministic Networks and I/O Density Scaling

The module executes high-speed packet scanning across distributed nodes to coordinate synchronized physical states with host processing units over Profinet / EtherNet/IP deterministic networks. During periods of expansive I/O density scaling across remote chassis layers, the hardware handles localized input/output state defaults during loss-of-signal scenarios without degrading backplane bus communication velocity. The dual SFP cages support direct fiber-optic integration to prevent ground loop noise propagation across long industrial distances, ensuring total firmware flash compatibility across mixed Series 90-30 and RX3i hardware networks.

Frequently Asked Questions

Q: How can network configurations be replicated across multiple IC693/IC695 chassis without programming software?

A: The module allows the I/O device name, IP address parameters, and operational configurations to be stored on an SD card. Inserting this card into another backup module transfers the configuration directly, bypassing the standard software interface.

Q: Are the SFP transceivers included within the base part number package?

A: No. The hardware contains 2 built-in RJ-45 ports and 2 empty SFP pluggable cages. The required single-mode or multi-mode SFP fiber transceivers must be specified and sourced separately based on physical cable media constraints.

Field Installation Guidelines

Remove system power from the destination universal backplane slot prior to inserting or removing the scanner module.
Mount the module vertically into the chassis guides, ensuring the backplane pins seat properly into the universal connector block before locking the chassis tabs.
When using fiber-optic loops, verify that the SFP module is locked inside the cage before mating the LC connector ferrule to the transceiver interface.
Separate the networking Ethernet cables from adjacent heavy AC motor leads inside wire trays to prevent induced electromagnetic distortion on the 1000 Mbps physical links.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.