IC695SPF002 GE PROFINET Scanner Module

IC695SPF002 GE RX3i PACSystems Scanner Module

IC695SPF002 GE RX3i PACSystems Scanner Module

Disponibilidad: 10 Quedan en stock

The GE IC695SPF002, also cataloged as the IC695SPF002 Scanner Module, serves as the primary IC695SPF002 Scanner Module utilized to execute...

Código: IC695SPF002

Manufacturer: GE Fanuc
Product No.: IC695SPF002
Product Type: Scanner Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 60g
Shipping port: Xiamen
Warranty: 12 months

Descripción Reseñas

The GE IC695SPF002, also cataloged as the IC695SPF002 Scanner Module, serves as the primary IC695SPF002 Scanner Module utilized to execute remote bus scanning and data synchronization across RX3i PACSystems platforms. The unit coordinates real-time data exchange between a localized RX3i I/O rack subsystem and an upstream host PROFINET controller.

Hardware Specifications

Parameter	Specification
Model	IC695SPF002
Brand	GE Fanuc Emerson
Origin	USA
Weight	0.06 kg (0.13 lbs)
Dimensions	Small form-factor pluggable architecture
Operating Temp	0 to 60 deg C (derated to 57 deg C if operating at 100 Mbps)
Power Consumption	Powered via 3.3 to 5 VDC rails
Transmission Medium	Multi-mode fiber (MMF) / Copper
Maximum Distance	2 Kilometers (via MMF)
Network Speed	100 to 1000 Mbps
Port Configuration	2x RJ-45 copper interfaces, 2x SFP cages
Peripheral Interfaces	1x USB port (firmware adjustments only), 1x SD card slot
Topology Configurations	Ring, Star, Daisy-chain

Industrial Control and Network Determinism

The IC695SPF002 integrates directly with Profinet / EtherNet/IP deterministic networks to manage remote rack synchronization without introducing cycle time anomalies. By applying specific firmware flash compatibility matrices via the localized configuration application, the unit achieves tight tracking over I/O density scaling profiles. The underlying data plane processes field transactions from legacy Series 90-30 or modern RX3i modules, routing the backplane data blocks sequentially over the media layers to avoid communication jitter.

Frequently Asked Questions

Q: What are the exact physical limitations and functional restrictions of the integrated USB interface?

A: The onboard USB interface is restricted to temporary validation and firmware flash execution using the WinLoader application. It is not engineered for permanent online network integration or runtime data collection.

Q: How is the onboard SD card utilized during field replacement of the module?

A: The SD card slot stores configured I/O device names and structural network designations. During hardware changes, this card allows direct duplication of identity metrics onto replacement modules without requiring an active connection to an external programming terminal.

Field Installation Guidelines

Media Selection and Thermal Considerations: When operating the module continuously at 100 Mbps, verify that the local enclosure internal atmosphere does not cross the derated limit of 57 deg C. Standard 1000 Mbps deployment supports the full 60 deg C ceiling.
Fiber Optic Bend Radius and Handling: Observe standard industrial minimum bend radii for the multi-mode fiber optic patch cables attached to the SFP blocks. Prevent any physical compression or twisting within wire ways to keep signal dampening within the 2 Kilometers specification.
Shield Grounding Protocols: Terminate the grounding tabs of all RJ-45 copper paths to the structural ground of the chassis to suppress common-mode noise and prevent electromagnetic degradation from corrupting the industrial PROFINET cycle.

¿Qué dicen nuestros clientes sobre nosotros?

¡Excelente soporte de emergencia!

Nuestra línea de producción se paró debido a un monitor Bently Nevada defectuoso. Lo encontramos en stock aquí y lo enviaron por DHL de inmediato. Volvió a funcionar en 48 horas, lo que realmente salvó nuestra planta.

Mark Thompson

Gerente de Mantenimiento, EE. UU.

Fuente confiable de repuestos nuevos

Encontrar módulos nuevos y originales es fundamental para nuestra seguridad. Este equipo entrega componentes de fábrica con certificación completa. Su compromiso de vender únicamente productos nuevos los convierte en nuestro socio de mayor confianza.

Robert Hoffmann

Jefe de ingeniería, Alemania

Servicio y calidad de primer nivel

Llevamos dos años abasteciendo aquí piezas de Honeywell y Schneider. Todos nuestros envíos llegan perfectamente embalados, con los precintos originales de fábrica intactos. Ofrecemos una comunicación clara y los mejores plazos de entrega del sector.