330703-000-060-10-02-00 Bently Nevada Proximity Probe

330703-000-060-10-02-00 Bently Nevada 3300 XL Proximity Probe

330703-000-060-10-02-00 Bently Nevada 3300 XL Proximity Probe

التوفر: 10 متوفر في المخزون

The Bently Nevada 330703-000-060-10-02-00, also cataloged as the 330703 Proximity Probe, operates as a dedicated hardware component for physical displacement...

رمز المنتج: 330703-000-060-10-02-00

Manufacturer: Bently Nevada
Product No.: 330703-000-060-10-02-00
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 100g
Shipping port: Xiamen
Warranty: 12 months

وصف التقييمات

The Bently Nevada 330703-000-060-10-02-00, also cataloged as the 330703 Proximity Probe, operates as a dedicated hardware component for physical displacement measurement within 3300 XL transducer networks.

Suffix Breakdown & Model Matrix

The part number 330703-000-060-10-02-00 designates specific physical properties based on the Bently Nevada ordering matrix:

330703: Base designator for 3300 XL 11 mm Proximity Probe (with M14 x 1.5 thread).
000: Unthreaded length option designating 0 mm.
060: Overall case length option designating 60 mm.
10: Total length option specifying 1.0 meter (3.3 feet).
02: Connector and cable type option specifying miniature coaxial ClickLoc connector, standard cable.
00: Agency approval option specifying no hazardous area approvals are required.

Hardware Specifications

Parameter	Specification
Model	330703-000-060-10-02-00
Brand	Bently Nevada
Origin	USA
Probe Tip Diameter	11.0 mm
Thread Type	M14 x 1.5 thread
Unthreaded Length	0 mm
Overall Case Length	60 mm
Total Probe Length	1.0 meter (3.3 feet)
Connector Type	Miniature coaxial ClickLoc
Cable Armor	Standard cable (without armor)
Agency Approval	None (Option 00)
Operating Temp	-51 to +177 deg C
Dimensions	2.5 cm * 2 cm * 12.4 cm
Net Weight	0.1 kg
Power Consumption	Passive transducer sensor (0 W)

Eddy-Current Probe Scaling & Gap Voltage Validation

This 11 mm probe relies on eddy-current technology to generate a high-frequency electromagnetic field that measures the distance between the probe tip and a conductive target. To maintain standard eddy-current probe scaling of 3.94 V/mm (100 mV/mil), the probe must be connected via a matched 11 mm extension cable to a calibrated 3300 XL 11 mm Proximitor. Accurate mechanical adjustment during commissioning is necessary to achieve proper gap voltage validation, aiming for a target value of -10 VDC at the physical center of the linear calibration range. Correct physical gapping ensures optimal tracking of rotor dynamics and prevents measurement distortion caused by signal cross-talk suppression between adjacent sensor installations.

Frequently Asked Questions

Q: Can this 11 mm proximity probe be used directly with an 8 mm Proximitor sensor?

A: No. The 11 mm probe tip has distinct electrical impedance properties and a wider sensing field than an 8 mm probe. Interfacing this probe with an 8 mm Proximitor will cause severe impedance mismatching, leading to calibration failure and invalid displacement readings.

Q: What is the significance of the 1.0 meter total length option in this transducer setup?

A: The 1.0 meter probe length represents the integrated cable length. This probe must be matched with an appropriate extension cable (such as 4.0 meters or 8.0 meters) to form a complete 5.0 meter or 9.0 meter system length required by the Proximitor calibration.

Field Installation Guidelines

Mounting and Torque: Thread the probe into the mounting bracket or sleeve. Do not exceed a tightening torque of 22.6 N-m (200 in-lb) for the M14 x 1.5 threads to prevent damaging the internal components.
Adjusting the Gap Voltage: Slowly rotate the probe toward the shaft target while monitoring the Proximitor sensor output voltage. Secure the probe locknut when the voltage matches the target offset of -10.0 VDC.
Connector Insulation: Keep the coaxial ClickLoc terminal dry and clean during connection. Ensure the integrated connector protector covers the interface completely to isolate the shield from the machine ground casing.

ماذا يقول عملاؤنا عنا؟

دعم طوارئ ممتاز!

تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.

مارك تومسون

مدير الصيانة، الولايات المتحدة الأمريكية

مصدر موثوق لقطع الغيار الجديدة

يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.

روبرت هوفمان

رئيس قسم الهندسة، ألمانيا

خدمة وجودة من الدرجة الأولى

نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.