Bently Nevada 190501-12-99-04 Velomitor CT Velocity Transducer

التوفر: 9 متوفر في المخزون

The Bently Nevada 190501-12-99-04 is a specialized Velomitor CT (Cooling Tower) velocity transducer engineered for low-frequency vibration monitoring. This piezoelectric...

رمز المنتج: 190501-12-99-04

Manufacturer: Bently Nevada
Product No.: 190501-12-99-04
Product Type: Vibration Transducer
Product Origin: USA
Payment:T/T, Western Union
Weight: 750g
Shipping port: Xiamen
Warranty: 12 months

وصف التقييمات

The Bently Nevada 190501-12-99-04 is a specialized Velomitor CT (Cooling Tower) velocity transducer engineered for low-frequency vibration monitoring. This piezoelectric sensor is optimized to measure casing vibration velocity on rotating machinery, specifically air-cooled heat exchangers and cooling tower fan assemblies operating at speeds of 90 RPM or higher.

Features

Low-frequency response optimized for cooling tower and fan assembly monitoring.
Measures casing vibration velocity to detect mechanical faults in rotating equipment.
Integrated 32-foot cable for simplified field installation.
Includes mounting hardware (12 Plate Stud 3/8-in 24 to M8x1).
Hazardous area certified for Class I, Division 1 and Class I, Zone 0/1 environments.

Applications

Power Generation: Protection for cooling tower fans and auxiliary cooling systems.
Oil & Gas: Monitoring critical cooling systems and heat exchangers.
Petrochemical & Chemical: Ensuring reliability of large-scale air-cooled heat exchangers.
Wastewater Treatment: Continuous vibration monitoring for aeration and cooling fan assemblies.

Technical Specifications

Model	190501-12-99-04
Sensitivity	3.94 mV/mm/s (100 mV/in/s) +/- 5%
Transverse Response	Less than 5% of axial sensitivity
Mounting	Plate Stud 3/8-in 24 to M8x1
Cable	Included 32-foot integral cable
Hazardous Area Approval	CSA/NRTL/C (Class I, Div 1); ATEX/IECEx/CSA (Class I, Zone 0/1)

Installation Guidelines

Mounting: Use the provided 3/8-in 24 to M8x1 stud. Apply a thread sealant such as Loctite 242 to the mounting stud to prevent loosening caused by continuous low-frequency oscillations.
Hazardous Areas: When installing in Class I, Div 1 or Zone 0/1 environments, you must utilize an intrinsically safe (IS) galvanic isolator or zener barrier to ensure compliance.
Handling: As a precision piezoelectric sensor, avoid dropping or subjecting the transducer to high-impact shocks during installation.
Cabling: Route the integral 32-foot cable away from high-voltage power lines to minimize electromagnetic interference (EMI).

FAQs

What is the primary purpose of the 190501-12-99-04?

This transducer is designed to monitor casing vibration on low-speed rotating equipment, specifically cooling tower fans and air-cooled heat exchangers that operate at 90 RPM or above.

What is the sensitivity of this sensor?

The sensor features a standard sensitivity of 3.94 mV/mm/s (100 mV/in/s) with a tolerance of +/- 5%.

Does this model require specific safety barriers?

Yes, for installations in hazardous locations (Class I, Div 1 or Zone 0/1), an approved intrinsically safe galvanic isolator or zener barrier is required.

ماذا يقول عملاؤنا عنا؟

دعم طوارئ ممتاز!

تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.

مارك تومسون

مدير الصيانة، الولايات المتحدة الأمريكية

مصدر موثوق لقطع الغيار الجديدة

يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.

روبرت هوفمان

رئيس قسم الهندسة، ألمانيا

خدمة وجودة من الدرجة الأولى

نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.