330104-00-05-05-02-05 Bently Nevada Proximity Probe

Bently Nevada 330104-00-05-05-02-05 3300 XL Proximity Probe

Bently Nevada 330104-00-05-05-02-05 3300 XL Proximity Probe

التوفر: 10 متوفر في المخزون

The Bently Nevada 330104-00-05-05-02-05, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for proximity and...

رمز المنتج: 330104-00-05-05-02-05

Manufacturer: Bently Nevada
Product No.: 330104-00-05-05-02-05
Product Type: Proximity Sensors
Product Origin: USA
Payment:T/T, Western Union
Weight: 2000g
Shipping port: Xiamen
Warranty: 12 months

وصف التقييمات

The Bently Nevada 330104-00-05-05-02-05, also cataloged as the 330104 Proximity Probe, operates as a dedicated hardware component for proximity and vibration sensing within 3300 XL machinery monitoring platforms. The hardware executing the physical displacement verification translates mechanical rotor dynamics into proportional voltage deviations via high-frequency eddy-current probe scaling circuits.

Suffix Breakdown & Model Matrix

Suffix Code	Option Description	Technical Parameter
330104	Base Model	3300 XL 8 mm Reverse Mount Proximity Probe
-00	Unthreaded Length Option	0.0 inches
-05	Overall Case Length Option	0.5 inches
-05	Total Length Option	0.5 meter (1.6 feet)
-02	Connector and Cable Type Option	Miniature coaxial ClickLoc connector, standard cable
-05	Agency Approval Option	Multiple global hazardous area approvals (ATEX/IECEx/CSA)

Hardware Specifications

Parameter	Specification
Model	330104-00-05-05-02-05
Brand	Bently Nevada
Origin	USA
Weight	0.12 kg nominal
Dimensions	8.0 mm probe tip diameter, 0.5 inches overall case length
Operating Temp	-51 deg C to +177 deg C nominal environmental parameters
Power Consumption	Passive hardware component modulated via Proximitor Sensor loop
Probe Tip Material	Polyphenylene sulfide (PPS)
Probe Case Material	AISI 303 or 304 stainless steel (SST)
Cable Impedance	75 Ohm nominal coaxial

Gap Voltage Validation and Cross-Talk Suppression

Physical deployment of this 8 mm reverse mount sensor requires meticulous gap voltage validation to map structural movements accurately within the linear calibration window. During static mechanical calibration, the physical gap must be adjusted until the circuit output tracks a -10 VDC target, anchoring the system at its linear midpoint. This baseline voltage optimization ensures the eddy-current probe scaling correctly interprets high-velocity rotor dynamics. Additionally, when multi-probe configurations are deployed on a single bearing housing, specific installation geometric constraints must be followed to ensure cross-talk suppression between concurrent sensor loops.

Frequently Asked Questions

Q: Does this passive proximity probe assembly support field-swapping without full loop re-calibration?

A: Yes. The 3300 XL 8 mm series probes feature matched internal electrical properties, allowing direct component interchangeability without requiring manual field calibration of the associated Proximitor.

Q: What are the continuous performance risks if the total electrical length deviates from the 0.5-meter specification?

A: Splicing or modifying the physical cable length alters total loop inductance and capacitance. This directly distorts the eddy-current tuning calibration, causing scaling errors and shifting the nominal -10 VDC baseline position.

Field Installation Guidelines

Mount the reverse mount probe housing securely into a heavy-duty sleeve or bracket assembly to isolate the sensor from secondary structural resonance. Ensure adequate physical clearance is maintained between the 8.0 mm tip and surrounding conductive metals to prevent side-viewing interference. Thread the assembly into the port until the dynamic gap voltage stabilizes at precisely -10 VDC on a calibrated digital voltmeter. Secure the outer locknuts to standard engineering torque limits to eliminate drift caused by operational thermal expansion. Keep the ClickLoc coaxial connection interface clean and dry within a sealed conduit box.

ماذا يقول عملاؤنا عنا؟

دعم طوارئ ممتاز!

تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.

مارك تومسون

مدير الصيانة، الولايات المتحدة الأمريكية

مصدر موثوق لقطع الغيار الجديدة

يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.

روبرت هوفمان

رئيس قسم الهندسة، ألمانيا

خدمة وجودة من الدرجة الأولى

نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.