GE Fanuc IC695PSA140 PACSystem RX3i Multi-Purpose Power Supply

التوفر: 10 متوفر في المخزون

The GE Fanuc IC695PSA140, also cataloged as the IC695PSA140 Multi-Purpose Power Supply, operates as a dedicated hardware component for internal...

رمز المنتج: IC695PSA140

Manufacturer: GE Fanuc
Product No.: IC695PSA140
Product Type: Power Supplies
Product Origin: USA
Payment:T/T, Western Union
Weight: 570g
Shipping port: Xiamen
Warranty: 12 months

وصف التقييمات

The GE Fanuc IC695PSA140, also cataloged as the IC695PSA140 Multi-Purpose Power Supply, operates as a dedicated hardware component for internal backplane power distribution and load-sharing execution within PACSystem RX3i platforms.

Hardware Specifications

Parameter	Specification
Model	IC695PSA140
Brand	GE Fanuc / Emerson
Origin	USA / As specified on hardware label
Weight	1.25 lbs (0.57 kg)
Dimensions	Standard single RX3i power supply slot footprint
Operating Temp	0 to 60 deg C
Power Consumption	Input Power: 70 W maximum; Output Capacity: 40 W total
AC Input Voltage	85 to 264 VAC (120/240 VAC nominal)
DC Input Voltage	100 to 300 VDC (125 VDC nominal)
Output Rails	+5.1 VDC (30 W max, limited to 7 A); +3.3 VDC (limited to 10 A); +24 VDC relay output (30 W max)
Backplane Support	Universal Backplane only (IC695 catalog series)
Redundancy Support	Supports load sharing and N+1 redundancy (up to 4 modules per rack)
Diagnostic LEDs	Power, P/S Fault, Overtemp, Overload
Terminal Current Limit	6 A per terminal

Backplane Bus Communication Velocity and Firmware Flash Compatibility

The IC695PSA140 supplies stable regulated voltage rails directly across the RX3i Universal Backplane structure, accommodating high-speed logic execution without degrading backplane bus communication velocity. Onboard hardware overcurrent protection limits the +5.1 VDC output to 7 A and the +3.3 VDC output to 10 A, while an internal input line fusible link prevents destructive fault propagation across connected CPU and I/O modules. When configured in redundant configurations, a latched fault state isolates the failed supply to maintain uninterrupted processing and preserve firmware flash compatibility during hot-standby transitions.

Frequently Asked Questions

Q: How many IC695PSA140 power supply modules can be installed in a single RX3i backplane rack?

A: Up to four IC695PSA140 modules can be installed in a single RX3i PACSystem Universal Backplane for load sharing and power redundancy applications.

Q: How is a fault state cleared on the IC695PSA140 after an overload or overtemperature event latches the unit off?

A: Once a fault condition latches the module into the OFF state, input AC or DC supply power must be power-cycled to reset the internal protection logic and resume normal operation.

Field Installation Guidelines

Verify that supply lines are de-energized before connecting AC (85 to 264 VAC) or DC (100 to 300 VDC) field wiring to the input terminal block.
Ensure power wiring does not exceed the maximum rating of 6 A per terminal, using properly sized stranded copper conductors.
Install the IC695PSA140 exclusively into designated power supply slots on an RX3i Universal Backplane (IC695 series).
Maintain proper cabinet ventilation to ensure ambient operating temperatures remain within limits, preventing overtemp trip latches.

ماذا يقول عملاؤنا عنا؟

دعم طوارئ ممتاز!

تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.

مارك تومسون

مدير الصيانة، الولايات المتحدة الأمريكية

مصدر موثوق لقطع الغيار الجديدة

يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.

روبرت هوفمان

رئيس قسم الهندسة، ألمانيا

خدمة وجودة من الدرجة الأولى

نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.