The GE Fanuc IC697CHS750, also cataloged as the IC697CHS750 I/O Rack, operates as a dedicated hardware component for module interconnectivity and backplane bus signal distribution within GE Series 90-70 PLC systems.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IC697CHS750 |
| Brand | GE Fanuc Emerson |
| Origin | USA |
| Weight | 8.88 lbs (4.03 kg) |
| Dimensions | 11.15 in (H) x 12.60 in (W) x 7.50 in (D) [254 mm deep enclosure] |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | Not specified (Passive backplane structure) |
| Rated Current | 20 Amperes |
| Supply Voltage | 5 VDC |
| Slot Capacity | 5 slots |
| Enclosure Rating | Open Enclosure, indoor use only |
| Cooling Type | Convection airflow cooling |
| Mounting Type | Rear mount mechanism |
| Series Compatibility | GE Series 90-70 / IC697 PLC series |
Backplane Bus Communication Velocity & I/O Density Scaling
The IC697CHS750 rack provides the physical housing and electrical backplane connectivity required for 5-slot Series 90-70 module configurations. Designed to maintain deterministic communication velocity across the backplane bus, the chassis structure routes high-speed data signals between processing units and expansion cards. The internal backplane power distribution supports up to 20 Amperes at 5 VDC to ensure stable voltage delivery across all populated slots. Firmware flash compatibility and noise-immune signaling are maintained across module backplane traces through dedicated grounding measures and rigid physical card guides.
Frequently Asked Questions
Q: How is power provided to individual modules installed in the IC697CHS750 chassis?
A: Modules populated within the 5 slots receive power via the internal backplane connector or through dedicated individual power supplies positioned on the left side of the module location.
Q: What physical clearance is required to maintain proper thermal dissipation for the rack?
A: The open enclosure relies on natural convection cooling. Unobstructed airflow pathways must be maintained between the chassis top/bottom ventilation spaces and nearby enclosure air outlets to prevent heat accumulation.
Q: How are field wiring connections secured to prevent mechanical strain on the backplane?
A: Field wiring passes through the bottom of the hinged door to access the removable terminal block, and an I/O terminal restraining strap on the side of the rack holds cables firmly in position.
Field Installation Guidelines
- Mount the IC697CHS750 chassis securely to a flat panel or enclosure backplate using the rear mounting holes. Ensure the mounting location is indoors and protected from environmental contaminants.
- Establish a low-impedance functional earth connection from the rack chassis ground point to the main panel ground bus to eliminate electrical noise interference.
- Align card modules carefully with the top and bottom slot guides before sliding them firmly into the backplane connectors.
- Route field wiring upward through the bottom opening of the hinged door. Secure all cable bundles using the side terminal restraining strap to prevent strain on the terminal connections.
- Verify that backplane J2 jumpers, if required by the system topology, are properly installed according to the Series 90-70 system expansion manual prior to applying primary power.
ماذا يقول عملاؤنا عنا؟
دعم طوارئ ممتاز!
تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.
مارك تومسون
مدير الصيانة، الولايات المتحدة الأمريكيةمصدر موثوق لقطع الغيار الجديدة
يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.
روبرت هوفمان
رئيس قسم الهندسة، ألمانياخدمة وجودة من الدرجة الأولى
نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.
لوكاس مولر
مدير العمليات، ألمانياالمنتجات ذات الصلة
مرشد
Translation missing: ar.general.search.loading