IC693PTM101 GE Series 90-30 Power Transducer Module Datasheet

GE IC693PTM101 Series 90-30 Power Transducer Module

GE IC693PTM101 Series 90-30 Power Transducer Module

التوفر: 10 متوفر في المخزون

The GE IC693PTM101, also cataloged as the IC693PTM101 Power Transducer Module, operates as a dedicated hardware component for electrical power...

رمز المنتج: IC693PTM101

Manufacturer: GE Fanuc
Product No.: IC693PTM101
Product Type: Power Transducer Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 3630g
Shipping port: Xiamen
Warranty: 12 months

وصف التقييمات

The GE IC693PTM101, also cataloged as the IC693PTM101 Power Transducer Module, operates as a dedicated hardware component for electrical power parameter calculation and RMS signal monitoring within Series 90-30 PLC backplane networks. The assembly consists of a processing module, an interface board, and an IC693CBL340 interface cable, accepting direct potential transformer and current transformer inputs to compute real-time electrical metrics.

Hardware Specifications

Parameter	Specification
Model	IC693PTM101
Brand	GE Fanuc Emerson
Series	Series 90-30
Product Type	Power Transducer Modules
Sub-Assembly Components	Processing module, interface board, IC693CBL340 cable
Input Voltage Range	10 VAC to 120 VAC
Input Current Range	0 A to 7.5 A
Operating Frequency	35 Hz to 70 Hz
Measured Parameters	Voltage, Current, kW, kVAR, kVA, kWH, kVARH, kVAH, Power Factor, Frequency, Phase
Signal Resolution	14-bit
Calculation Speed	20 ms at 50 Hz; 16.67 ms at 60 Hz
Operating Modes	Single mode, 3-phase mode, Synchro monitor mode
Memory Allocation	%I: 16 bits; %Q: 16 bits; %AI: 25 words; %AQ: 2 words
Backplane Power Consumption	400 mA maximum at 5 VDC
Power Dissipation	4 W maximum
Backplane Isolation	1500 VAC
Operating Temp	0 to +60 deg C
Mounting	Any standard Series 90-30 baseplate slot
Dimensions	Standard Series 90-30 single-slot footprint
Weight	3.63 kg (8.00 lbs)
Origin	USA

Backplane Bus Interfacing and Deterministic Networks

The IC693PTM101 processes raw transformer waveforms through a 14-bit analog stage and transmits RMS calculated values over the backplane bus. Utilizing high backplane bus communication velocity, the processing module updates CPU register memory (%I, %Q, %AI, and %AQ) every 16.67 ms (at 60 Hz) or 20 ms (at 50 Hz). Galvanic isolation of 1500 VAC between field transformer connections and the 5 VDC backplane bus maintains signal integrity and preserves firmware flash compatibility across local, expansion, and remote baseplate configurations.

Frequently Asked Questions

Q: What memory mapping registers are allocated in the Series 90-30 CPU for the IC693PTM101?

A: The module reserves 16 discrete input bits (%I), 16 discrete output bits (%Q), 25 analog input words (%AI), and 2 analog output words (%AQ) in the controller memory map.

Q: What operating modes can be configured on the IC693PTM101?

A: The module can be programmed via software to run in Single mode, 3-Phase mode (Wye or Delta configurations), or Synchro Monitor mode for generator-to-grid synchronization monitoring.

Q: What backplane power current draw does the processing module require?

A: The IC693PTM101 draws a maximum of 400 mA at 5 VDC directly from the Series 90-30 backplane power supply, with total power dissipation capped at 4 W.

Field Installation Guidelines

Isolate primary rack power and disconnect external CT/PT secondary circuits prior to mounting or servicing the hardware.
Wear an ESD grounding wrist strap clamped to an unpainted enclosure chassis frame to prevent static discharge to the processing card.
Install the processing module into any available Series 90-30 baseplate slot and seat the interface board near the transformer terminal block.
Interconnect the processing module and interface board using the provided IC693CBL340 cable, tightening retaining screws at both ports.
Connect input signals within 10 to 120 VAC and 0 to 7.5 A limits, ensuring transformer shields and enclosure metalwork are firmly earth-grounded.

ماذا يقول عملاؤنا عنا؟

دعم طوارئ ممتاز!

تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.

مارك تومسون

مدير الصيانة، الولايات المتحدة الأمريكية

مصدر موثوق لقطع الغيار الجديدة

يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.

روبرت هوفمان

رئيس قسم الهندسة، ألمانيا

خدمة وجودة من الدرجة الأولى

نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.