The GE IS200ERIOH1ABC, also cataloged as the IS200ERIO Exciter Regulator I/O Board, operates as a dedicated hardware component for customer and system signal interfacing within GE EX2100 Excitation Systems and Mark VI platforms. Mounting into ERBP or ERRB backplanes, the card routes control signals across ECTBG2, EPCT, EROC, ERDD, and ERRR terminal boards to execute real-time excitation regulation across simplex and redundant loops.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS200ERIOH1ABC (IS200ERIO) |
| Brand | GE (General Electric) |
| Origin | USA |
| Operating Temp | -30 to 65 deg C |
| Power Consumption | System Backplane Bus Powered |
| Application Configurations | Simplex and Redundant EX2100 Excitation Systems |
| Onboard Processing | Field Programmable Gate Array (FPGA) with Dual Port Memory (DPM) |
| Backplane Connections | ERBP (Simplex) / ERRB (Redundant) Backplane Bus |
| Interface Connectors | Dual 25-pin D-sub connectors to backplane |
| Terminal Board Compatibility | ECTBG2, EPCT, EROC, ERDD, and ERRR terminal boards |
Deterministic Network Backplane Bus Velocity and FPGA Processing
The IS200ERIOH1ABC utilizes an onboard Field Programmable Gate Array (FPGA) to execute high-speed data acquisition directly into Dual Port Memory (DPM), optimizing backplane bus communication velocity across the EX2100 control architecture. Integrated firmware flash compatibility across the FPGA logic array allows synchronized signal scaling across high-density I/O connections. Physical interconnections via dual 25-pin backplane connectors maintain deterministic communication paths between customer field terminals and core excitation processors without transmission delays.
Frequently Asked Questions
Q: How differs the backplane installation between simplex and redundant configurations for the IS200ERIOH1ABC?
A: In simplex control systems, the card mounts to an ERBP (Exciter Regulator Backplane), whereas in redundant configurations, it interfaces via an ERRB (Exciter Regulator Redundant Relay Backplane) to route signals to the ERRR board.
Q: What onboard architecture handles real-time I/O data acquisition on the board?
A: Signal storage and high-speed data acquisition are managed by a dedicated Field Programmable Gate Array (FPGA) interfacing directly with onboard Dual Port Memory (DPM).
Q: How are external terminal boards connected to the IS200ERIOH1ABC?
A: The board interfaces with customer and system terminal boards (EPCT, ECTBG2) through two 25-pin high-density connectors mated directly to the underlying backplane.
Field Installation Guidelines
- De-energize all primary power feeds to the EX2100 cabinet and verify zero potential on excitation circuits prior to board handling.
- Fasten a grounded ESD wrist strap to a bare metal chassis point before opening anti-static packaging.
- Align the dual 25-pin D-sub connectors with the mating receptacles on the ERBP or ERRB backplane socket.
- Seat the board firmly into the backplane slot using even pressure along the front panel edges.
- Tighten all panel retention screws to a maximum torque of 0.8 Nm (7 in-lbs) and confirm terminal grounding straps are securely clamped.
ماذا يقول عملاؤنا عنا؟
دعم طوارئ ممتاز!
تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.
مارك تومسون
مدير الصيانة، الولايات المتحدة الأمريكيةمصدر موثوق لقطع الغيار الجديدة
يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.
روبرت هوفمان
رئيس قسم الهندسة، ألمانياخدمة وجودة من الدرجة الأولى
نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.
لوكاس مولر
مدير العمليات، ألمانياالمنتجات ذات الصلة
ABB NTAC-02 58967441 Pulse Encoder Interface Module
$99.00
$199.00
GE Fanuc IC610MDL116 Series One Analog Input Module
$99.00
$199.00
ABB 1SBL351001R8011 A50-30-11 DC Contactor
$99.00
$199.00
ABB NDCU-21 63985317B Drive Control Unit
$99.00
$199.00
Bently Nevada 3300/12-02-20-00 Power Supply Module
$50.00
$100.00
ABB TB840A 3BSE037760R1 Modulebus Cluster Modem
$99.00
$199.00
ABB 1VCR017053G0006 VSC Power Supply and Control Board
$99.00
$199.00
Bently Nevada 3500/40-03-01 Proximitor Monitor Module
$100.00
$120.00
ABB DSBC172 Advant Master Bus Repeater Module
$99.00
$199.00
ABB NPOW-41 Power Supply Board
$99.00
$199.00
Bently Nevada 3500/45 Position Monitor Module
$100.00
$120.00
Bently Nevada 3300/55 Dual Velocity Monitor
$99.00
$199.00
ABB FPR3315101R1032 ICSI16D1 CS31 I/O Remote Unit 24 Vdc
$99.00
$199.00
ABB 3BHE021951R0124 KVC758 A124 Power Supply Module
$99.00
$199.00
GE Fanuc A02B-0091-C113 Macro Cassette B Memory Module
$99.00
$199.00
مرشد
Translation missing: ar.general.search.loading