IC200UDD110 GE VersaMax Micro 28 PLC

التوفر: 10 متوفر في المخزون

The GE IC200UDD110, also cataloged as the IC200UDD110 Micro 28 PLC, operates as a dedicated hardware component for discrete program...

رمز المنتج: IC200UDD110

Manufacturer: GE Fanuc
Product No.: IC200UDD110
Product Type: Programmable Logic Controllers
Product Origin: USA
Payment:T/T, Western Union
Weight: 910g
Shipping port: Xiamen
Warranty: 12 months

وصف التقييمات

The GE IC200UDD110, also cataloged as the IC200UDD110 Micro 28 PLC, operates as a dedicated hardware component for discrete program execution and I/O signal processing within VersaMax automation platforms. Designed with an integrated 28-point I/O architecture, the controller provides 16 discrete inputs and 12 discrete outputs operating at 24 VDC. Operating from a 24 VDC power supply with an input power draw of 5 W, the unit features two onboard analog potentiometers for manual parameter adjustment directly within real-time control loops.

Hardware Specifications

Parameter	Specification
Model	IC200UDD110
Brand	General Electric
Origin	USA
Weight	0.91 kg (2.00 lbs)
Dimensions	Standard VersaMax Micro 28 Frame
Operating Temp	0 to 60 deg C
Power Consumption	5 W
Power Supply Voltage	24 VDC
Total I/O Count	28 Points
Discrete Inputs	16 points (24 VDC sink/source)
Discrete Outputs	12 points (24 VDC)
Onboard Analog Pots	2 analog potentiometers
Portable Memory Module	Not supported

Deterministic Network Backplane & I/O Density Scaling

The IC200UDD110 executes deterministic scan cycles to coordinate local discrete channels with expanded field nodes across Profinet or EtherNet/IP networks. High I/O density scaling allows 28 local points to interface directly with field instrumentation without compromising scan execution rates. Firmware flash compatibility ensures program execution stability during industrial power transitions, maintaining register retention and predictable discrete switching performance across all 24 VDC input and output stages.

Frequently Asked Questions

Q: Can the IC200UDD110 accept portable memory modules for program backup?

A: No. The IC200UDD110 does not support portable memory modules. Program logic and hardware configuration must be loaded directly via the serial communication port.

Q: What is the power supply requirement for operating the IC200UDD110 base unit?

A: The module requires an external 24 VDC power supply connected to its primary power terminals, consuming a nominal 5 W during operation.

Q: How are the two integrated analog potentiometers utilized within the PLC?

A: The two onboard potentiometers map internal 8-bit digital values directly to CPU memory registers, allowing manual adjustments of timers, counters, or threshold setpoints without external programming devices.

Field Installation Guidelines

Power Isolation: Disconnect main power to the control panel before mounting, wiring, or servicing the PLC unit.
DIN Rail Mounting: Snap the controller onto a standard 35 mm DIN rail or secure it to the backpanel using M4 mounting screws. Ensure the DIN rail is bonded to protective earth (PE).
Power Input Wiring: Connect the external 24 VDC power supply to the designated DC power terminals, ensuring correct polarity (+24 VDC and DC return).
I/O Terminal Wiring: Wire 24 VDC input devices to terminals 1 through 16 and 24 VDC output loads to terminals 1 through 12, maintaining separation between field signal wiring and high-voltage AC cables.
Shielding and Grounding: Connect all signal cable shields to a single grounding point on the panel enclosure to prevent ground loops and electromagnetic interference.

ماذا يقول عملاؤنا عنا؟

دعم طوارئ ممتاز!

تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.

مارك تومسون

مدير الصيانة، الولايات المتحدة الأمريكية

مصدر موثوق لقطع الغيار الجديدة

يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.

روبرت هوفمان

رئيس قسم الهندسة، ألمانيا

خدمة وجودة من الدرجة الأولى

نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.