The GE IS200TBCIS2CCD, also cataloged as the IS200TBCI Control Terminal Board, operates as a dedicated hardware component for field signal termination and I/O distribution within GE Mark VI Speedtronic platforms. The board conditions discrete and analog input/output signals, connecting field transmitters and actuators directly to internal VMEbus I/O packs.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS200TBCIS2CCD (IS200TBCI) |
| Brand | GE (General Electric) |
| Origin | USA |
| Weight | 2.2 lbs (1.0 kg) |
| Dimensions | 13.39 in x 8.50 in x 2.17 in (340 mm x 216 mm x 55 mm) |
| Operating Temp | -40 to 85 deg C |
| Power Consumption | 10 W |
| Nominal Voltage | 24 VDC |
| Input/Output Points | 32 channel points |
| Communication Interface | Ethernet, RS-232, and dedicated system bus |
| Humidity | 5% to 95% (non-condensing) |
Deterministic Network Backplane Bus Velocity and I/O Density Scaling
The IS200TBCIS2CCD handles signal concentration across 32 discrete I/O channels to optimize backplane bus communication velocity across Mark VI control racks. Onboard filter networks suppress high-frequency line noise, preserving signal integrity during real-time data frame transfers. Supporting flexible I/O density scaling architectures, the unit integrates firmware flash compatibility to match connected controller rack configurations, maintaining synchronized operational states across simplex and redundant termination configurations.
Frequently Asked Questions
Q: How are field wiring connections landed on the IS200TBCIS2CCD?
A: Field wiring terminates directly onto barrier-style screw terminal blocks located on the board surface, interfacing to control racks via standard multi-pin cable harnesses.
Q: Can the IS200TBCIS2CCD be replaced while system power is applied?
A: Power to the specific terminal board and connected field loops must be isolated prior to removal to avoid signal disruptions or physical damage to onboard filter components.
Q: What mechanisms ensure noise immunity across the 32 input/output channels?
A: Onboard passive filtering networks and galvanic isolation circuits protect signal paths from electromagnetic interference and common-mode voltage surges.
Field Installation Guidelines
- De-energize all primary 24 VDC power distribution feeds to the terminal board before initiating physical installation or wiring changes.
- Wear an ESD grounding wrist strap connected to a bare metal frame surface during unit handling.
- Secure the board to the panel DIN rail or mounting studs using standard mechanical fasteners to maintain structural earth ground contact.
- Route low-voltage analog and discrete signal cables through separate wire ducts away from high-voltage AC lines to prevent inductive coupling.
- Torque all terminal block screw connections to vendor specifications and ground shielded cable drain wires at the cabinet ground bus.
ماذا يقول عملاؤنا عنا؟
دعم طوارئ ممتاز!
تعطل خط إنتاجنا بسبب عطل في شاشة بنتلي نيفادا. وجدناها متوفرة لدينا في المخزون، وقاموا بشحنها إلينا عبر DHL على الفور. عاد خط الإنتاج للعمل في غضون 48 ساعة - لقد أنقذت هذه الشاشة مصنعنا حقًا.
مارك تومسون
مدير الصيانة، الولايات المتحدة الأمريكيةمصدر موثوق لقطع الغيار الجديدة
يُعدّ العثور على وحدات أصلية جديدة تمامًا أمرًا بالغ الأهمية لسلامتنا. يُقدّم هذا الفريق مكونات جديدة من المصنع مع شهادات اعتماد كاملة. والتزامهم ببيع المنتجات الجديدة فقط يجعلهم شريكنا الأكثر ثقة.
روبرت هوفمان
رئيس قسم الهندسة، ألمانياخدمة وجودة من الدرجة الأولى
نستورد قطع غيار هانيويل وشنايدر من هنا منذ عامين. تصل كل شحنة مغلفة بإحكام مع الحفاظ على أختام المصنع الأصلية. نتميز بالتواصل الواضح وأفضل أوقات التسليم في هذا المجال.
لوكاس مولر
مدير العمليات، ألمانياالمنتجات ذات الصلة
ABB NTAC-02 58967441 Pulse Encoder Interface Module
$99.00
$199.00
GE Fanuc IC610MDL116 Series One Analog Input Module
$99.00
$199.00
ABB 1SBL351001R8011 A50-30-11 DC Contactor
$99.00
$199.00
ABB NDCU-21 63985317B Drive Control Unit
$99.00
$199.00
Bently Nevada 3300/12-02-20-00 Power Supply Module
$50.00
$100.00
ABB TB840A 3BSE037760R1 Modulebus Cluster Modem
$99.00
$199.00
ABB 1VCR017053G0006 VSC Power Supply and Control Board
$99.00
$199.00
Bently Nevada 3500/40-03-01 Proximitor Monitor Module
$100.00
$120.00
ABB DSBC172 Advant Master Bus Repeater Module
$99.00
$199.00
ABB NPOW-41 Power Supply Board
$99.00
$199.00
Bently Nevada 3500/45 Position Monitor Module
$100.00
$120.00
Bently Nevada 3300/55 Dual Velocity Monitor
$99.00
$199.00
ABB FPR3315101R1032 ICSI16D1 CS31 I/O Remote Unit 24 Vdc
$99.00
$199.00
ABB 3BHE021951R0124 KVC758 A124 Power Supply Module
$99.00
$199.00
GE Fanuc A02B-0091-C113 Macro Cassette B Memory Module
$99.00
$199.00
مرشد
Translation missing: ar.general.search.loading