145004-47 Bently Nevada Proximitor Sensor

145004-47 Bently Nevada 3300 XL Proximity Sensors

145004-47 Bently Nevada 3300 XL Proximity Sensors

Availability: 10 left in stock

Bently Nevada 145004-47 3300 XL 11mm Proximitor Sensor The Bently Nevada 145004-47, also cataloged as the 330180-X1-05 Proximitor Sensor, operates...

SKU: 145004-47

Manufacturer: Bently Nevada
Product No.: 145004-47
Product Type: Proximity Sensors
Product Origin: Switzerland
Payment:T/T, Western Union
Weight: 250g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Bently Nevada 145004-47 3300 XL 11mm Proximitor Sensor

The Bently Nevada 145004-47, also cataloged as the 330180-X1-05 Proximitor Sensor, operates as a dedicated hardware component for contactless shaft vibration and axial position measurement within 3300 XL Machinery Protection System platforms.

Suffix Breakdown & Model Matrix

330180: Base model designation for 3300 XL Proximitor Sensor.
X1: High-reliability vibration monitoring performance series designation.
05: 5.0-meter total system length calibration, matched to 5.0 m probe and extension cable sets.
MOD 145004-47: Specialized modification parameter defining internal gain curves for 11mm probe system sensitivity and scale factor.

Hardware Specifications

Parameter	Specification
Model	145004-47 (330180-X1-05)
Brand	Bently Nevada
Origin	USA
Weight	0.25 kg
Dimensions	81.3 mm x 61.2 mm x 43.2 mm
Operating Temp	-35 deg C to +100 deg C
Power Consumption	30 mA maximum
Compatible Probe	3300 XL 11mm Proximity Probe
Output Sensitivity	3.94 V/mm (100 mV/mil) Nominal
Linear Range	4.0 mm (160 mils)
Frequency Response	0 Hz to 10 kHz
System Length	5.0 Meters
Accuracy	Within +/-0.25% of full-scale range
Input Voltage	-17.5 VDC to -26 VDC
Compliance	API 670 Standard

Machinery Monitoring & Eddy-Current Proximity Calibration

The unit conditions high-frequency RF signals to drive precise eddy-current probe scaling across the 4.0 mm linear range. Internal circuitry relies on rigorous gap voltage validation (-10 VDC targets representing nominal mid-scale position) to preserve measurement linearity during rotor dynamics transitions. Signal conditioning pathways suppress cross-talk caused by adjacent channel magnetic field overlap, which ensures deterministic signal delivery over long field cable runs to downstream monitoring racks.

Frequently Asked Questions

Q: Can an engineer connect the 145004-47 Proximitor Sensor directly to an 8mm proximity probe?

A: No, connecting an 8mm probe alters the magnetic field inductance, causing severe scale factor errors and invalidating calibrated linearity across the output range.

Q: What impact does altering total system cable length have on signal execution?

A: Deviating from the factory-calibrated 5.0-meter system length changes total loop capacitance, which shifts nominal sensitivity away from the specified 100 mV/mil performance threshold.

Q: Is field recalibration required during replacement of a damaged module?

A: No, standard 5.0-meter matched components swap directly into the loop, as factory-preset gain curves maintain interchangeability without field potentiometer adjustments.

Field Installation Guidelines

Mount the metallic enclosure securely onto a grounded DIN rail or sub-panel using direct mechanical fasteners. Ensure the coaxial cable connectors maintain clean metal-to-metal surface connection, and wrap external cable joints in self-fusing silicone tape to prevent moisture ingress. Verify that power source wiring supplies stable negative voltage within the -17.5 VDC to -26 VDC operating window. Route signal wiring through dedicated instrument trays, maintaining proper physical isolation from high-voltage AC lines to prevent ambient noise coupling. Always establish single-point shield grounding at the monitor rack to eliminate ground loop currents across the transducer loop.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.