16925-10 Bently Nevada Interconnect Cable

16925-10 | Bently Nevada | Interconnect Cable

Availability: 10 left in stock

Configured for signal transmission in machine protection systems, the Bently Nevada 16925-10 (16925 Interconnect Cable) provides direct physical execution for...

SKU: 16925-10

Manufacturer: Bently Nevada
Product No.: 16925-10
Product Type: Interconnect Cables
Product Origin: USA
Payment:T/T, Western Union
Weight: 250g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Configured for signal transmission in machine protection systems, the Bently Nevada 16925-10 (16925 Interconnect Cable) provides direct physical execution for accelerometer output coupling.

Hardware Specifications

Parameter	Specification
Model	16925-10
Brand	Bently Nevada
Origin	USA
Weight	0.2 kg
Dimensions	10 ft (3.0 m) length
Operating Temp	-49 deg C to +177 deg C
Power Consumption	N/A (Passive component)
Operating Voltage	600 V
Current Rating	10 A
Conductors	22 AWG (0.5 mm2) Copper
Shielding	Braided EMI protection
Termination	3-socket plug, terminal lugs

Rotor Dynamics and Signal Integrity

The 16925-10 cable assembly is calibrated to support the stringent requirements of rotor dynamics monitoring. When interfacing with Bently Nevada proximity or acceleration transducers, maintaining the integrity of the -10 VDC gap voltage target is mandatory for accurate shaft displacement and vibration measurement. The inclusion of a braided shield serves to mitigate electromagnetic interference that can induce false frequency peaks. Engineers must ensure that signal loops do not exceed the design-calculated impedance, as parasitic capacitance within extended cable runs can dampen the high-frequency response required for comprehensive machine diagnostics.

Frequently Asked Questions

Q: Is this cable assembly suitable for continuous submersion in hydraulic fluid?

A: The FEP jacket provides chemical resistance; however, the termination points (3-socket plug) are not rated for fluid submersion. Ensure all connectors are installed in an ingress-protected junction box if exposed to aggressive fluids.

Q: Can the cable be trimmed to shorter lengths without affecting signal quality?

A: While physical shortening is possible, it is not recommended as it alters the specified cable impedance and may introduce termination inconsistencies. Use the exact factory-supplied length to maintain system-wide frequency response consistency.

Field Installation Guidelines

Route the cable through dedicated instrumentation conduit, ensuring a minimum distance of 30 cm from high-power AC lines to prevent induction.
Verify that the 3-socket plug is seated firmly until the locking mechanism engages to ensure a low-resistance connection.
Terminate the lug ends in a clean, dry terminal block environment to prevent galvanic corrosion or insulation resistance degradation over time.
Ensure the cable is secured with strain-relief clamps every 1.5 m to prevent mechanical tension on the sensor connector during thermal expansion or vibration events.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.