16925-99 Bently Nevada Interconnect Cable

16925-99 | Bently Nevada | Interconnect Cable

Availability: 10 left in stock

The Bently Nevada 16925-99, also cataloged as the 16925 Interconnect Cable, operates as a dedicated hardware component for signal transmission...

SKU: 16925-99

Manufacturer: Bently Nevada
Product No.: 16925-99
Product Type: Interconnect Cables
Product Origin: USA
Payment:T/T, Western Union
Weight: 200g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

The Bently Nevada 16925-99, also cataloged as the 16925 Interconnect Cable, operates as a dedicated hardware component for signal transmission between monitoring transducers and junction points within machine protection networks.

Hardware Specifications

Parameter	Specification
Model	16925-99
Brand	Bently Nevada
Origin	USA
Weight	0.2 kg
Dimensions	99 ft (30 m) length
Operating Temp	-40 deg C to +85 deg C
Power Consumption	N/A (Passive component)
Conductors	2 x 24 AWG copper
Termination	Screw terminals

Rotor Dynamics and Signal Integrity

The 16925-99 cable assembly is engineered for signal path continuity in rotor dynamics monitoring applications. To ensure accuracy, especially when utilizing proximity probes, the installation must maintain stable impedance characteristics to prevent signal reflection. During setup, verifying the probe gap voltage against the -10 VDC target at the monitor interface is mandatory to confirm correct transducer proximity. Excessive cable length can introduce parasitic capacitance; therefore, ensure that the total loop resistance remains within the specified tolerances for the connected monitoring module to prevent attenuation of the vibration frequency spectrum.

Frequently Asked Questions

Q: Can this cable be used for signal runs exceeding 99 ft?

A: Extending the cable beyond the factory-supplied 99 ft length is not recommended. Added cable length increases signal attenuation and potential for noise coupling, which can degrade the signal-to-noise ratio required for reliable rotor dynamics analysis.

Q: Are there specific requirements for the screw terminal connections?

A: Ensure that the conductors are properly stripped without nicking the copper strands to prevent high-resistance connection points. All connections must be physically secured to prevent intermittent contact caused by high-vibration environments.

Field Installation Guidelines

Route the cable through dedicated electrical conduits, maintaining a minimum separation of 30 cm from high-voltage AC lines to minimize electromagnetic interference.
Utilize proper cable strain relief at the entry points of junction boxes to prevent mechanical stress on the screw terminal connections.
Ensure the cable jacket is not crimped or deformed during pulling, as damage to the insulation layer can compromise the integrity of the signal path.
Verify the shield continuity is maintained throughout the entire cable run and grounded at the monitor end to provide effective cross-talk suppression.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.