1769-IR6 Rockwell Automation 6-Channel Analog RTD Module

Availability: 99 left in stock

Product Overview The Allen-Bradley 1769-IR6 functions as a high-resolution thermal interface for CompactLogix and MicroLogix 1500 controllers. This module converts resistance signals...

SKU: 1769-IR6

Manufacturer: Allen Bradley
Product No.: 1769-IR6
Product Type: RTD Input Modules
Product Origin: USA
Payment:T/T, Western Union
Weight: 450g
Shipping port: Xiamen
Warranty: 12 months

Description Reviews

Product Overview

The Allen-Bradley 1769-IR6 functions as a high-resolution thermal interface for CompactLogix and MicroLogix 1500 controllers. This module converts resistance signals from RTD sensors into digital temperature data, providing six independently configurable channels. We offer this unit as 100% Brand New, ensuring factory-sealed integrity for critical process control. It targets high-precision applications including semiconductor fabrication, HVAC management, and chemical processing where even minor temperature fluctuations compromise product quality.

Technical Specifications

The 1769-IR6 utilizes 14-bit to 16-bit resolution to deliver granular data for complex thermal loops.

Feature	Specification
Channels	6 RTD / Resistance (Individually Configurable)
Supported RTDs	Platinum (100, 200, 500, 1000 Ω); Copper (10 Ω); Nickel (120 Ω); Nickel-Iron (604 Ω)
Resistance Ranges	0–150 Ω, 0–500 Ω, 0–1000 Ω, 0–3000 Ω
Resolution	14-bit (RTD); Up to 16-bit (Direct Resistance)
Backplane Current	100 mA @ 5.1V DC; 45 mA @ 24V DC
Isolation Voltage	720V DC (Channel-to-Bus)
Common Mode Rejection	>100 dB @ 50/60 Hz
Response Time	6 ms to 303 s (User-configurable filter)
Terminal Block	1769-RTBN18 (Removable)

Engineering Advantages

Superior Noise Immunity: The module employs optical and magnetic coupling to isolate the bus from field circuitry. This architecture prevents industrial electrical noise and transients from corrupting controller logic or damaging sensitive backplane components.
Precision Lead-Wire Compensation: The 1769-IR6 compensates for up to 25 Ω of wire impedance in 3-wire and 4-wire configurations. This eliminates measurement errors caused by long cable runs between the sensor and the control cabinet.
Advanced Fault Diagnostics: The hardware constantly monitors for open-circuit and short-circuit conditions. By identifying field wiring failures instantly, the module prevents the PLC from executing logic based on "frozen" or erroneous temperature data.
Low Thermal Profile: Drawing only 1.5 Watts of power, the module minimizes heat buildup within the I/O bank. This efficiency extends the lifespan of adjacent components in tightly packed enclosures.

FAQs

Can I mix different RTD types on a single 1769-IR6 module?

Yes. You can configure each of the six channels independently. For instance, you may connect a Platinum 100 Ω sensor to Channel 0 and a Copper 10 Ω sensor to Channel 1 without interference.
How does the module handle long-distance sensor wiring?

The module supports 3-wire and 4-wire RTD connections to provide automatic lead-wire compensation. This ensures that the resistance of the copper field wiring does not add an offset to your temperature readings.
Does this module support direct resistance measurements without a temperature conversion?

Absolutely. You can configure the module for direct resistance measurement (0–3000 Ω). This is ideal for interfacing with potentiometers or other variable-resistance components that do not follow standard RTD curves.
What is the benefit of the user-configurable digital filter?

The filter allows you to balance response speed against signal stability. In high-vibration environments or areas with significant electrical interference, increasing the filter time stabilizes the data and prevents "chatter" in your control loops.

What's clients say about us

Excellent Emergency Support!

Our production line was down due to a faulty Bently Nevada monitor. We found it in stock here and they shipped it via DHL immediately. Back in operation within 48 hours—truly a lifesaver for our plant.

Mark Thompson

Maintenance Manager, USA

Reliable Source for New Spares

Finding brand new, original modules is critical for our safety. This team delivers factory-fresh components with full certification. Their commitment to only selling new products makes them our most trusted partner.

Robert Hoffmann

Engineering Lead, Germany

Top-tier Service and Quality

We have sourced Honeywell and Schneider parts here for two years. Every shipment arrives well-packaged with original factory seals intact. Clear communication and the best lead times in the industry.